July 2003 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Jul 1 08:05:22 EST 2003
Ending: Thu Jul 31 17:59:53 EST 2003
Messages: 289

• [mems-talk] Adhesion promotors for TiN   Bill Moffat
  • [mems-talk] Ti Etch   kris
    • [mems-talk] Ti Etch   Rick Morrison
    • [mems-talk] Ti Etch   Yair Gannot
• [mems-talk] Stress values of various films   Dave Kharas
• [mems-talk] Adhesion promotors for TiN   Knut Lian
• [mems-talk] Stress values of various films   Raj Kumar
• [mems-talk] Re: Removal of Mo oxidation   Craig McGray
• [mems-talk] Boron Doping Job   Kimberly Appel
• [mems-talk] SBIR   Jerry Glaser
• [mems-talk] Frustrated by 2um Nitride   Richard_Barnett at stsystems.co.uk
• [mems-talk] Adhesion promotors for TiN   Eichinger-Heue Robert
• [mems-talk] platinum on SU-8   Chen-Han Lee
  • [mems-talk] platinum on SU-8   Kirt & Erika Zipf-Williams
    • [mems-talk] platinum on SU-8   sokwon Paik
    • [mems-talk] platinum on SU-8   Chen-Han Lee
      • [mems-talk] platinum on SU-8   Mighty Platypus
      • [mems-talk] platinum on SU-8   Chen-Han Lee
      • [mems-talk] platinum on SU-8   Kirt & Erika Zipf-Williams
• [mems-talk] Silicon-Chromium Bonding   Jim Intrater
• [mems-talk] Mumps structure length prevent stiction   rakesh babu
  • [mems-talk] Nitinol Software   Alberto Borboni
    • [mems-talk] Gold film fail at high temperature   Zhengfan Zhang
      • [mems-talk] Gold film fail at high temperature   beaton at npphotonics (Bill Eaton)
  • [mems-talk] Mumps structure length prevent stiction   weiwei2
    • [mems-talk] Problem in stiction   ramji dhakal
• [mems-talk] platinum on SU-8   BobHendu at aol.com
• [mems-talk] Frustrated by 2um Nitride Release!   beaton at npphotonics (Bill Eaton)
• [mems-talk] Cu Metal Etchant   Pavel Neuzil
• [mems-talk] Ti Etch   kin at astri.org
• [mems-talk] SU-8 for uCP   Wimplinger Markus
• [mems-talk] DSP vs SSP   Tom Fan
  • [mems-talk] DSP vs SSP   beaton at npphotonics (Bill Eaton)
  • [mems-talk] DSP vs SSP   Kirt & Erika Zipf-Williams
• [mems-talk] MEMS Packaging House   Propak
• [mems-talk] SU-8 problem   Christopher Blanford
• [mems-talk] Looking for Capacitive Pressure Sensors   Jay
  • [mems-talk] Looking for Capacitive Pressure Sensors   R. Brent Garber
• [mems-talk] SU-8 problem   Thomas KF Lei
  • [mems-talk] SU-8 problem   Greg Reimann
    • [mems-talk] SU-8 problem   Thomas KF Lei
      • [mems-talk] SU-8 problem   Greg Reimann
      • [mems-talk] SU-8 problem   Erhan Ata
• [mems-talk] Cu Metal Etchant   이태원
  • [mems-talk] Cu Metal Etchant   Greg Reimann
  • [mems-talk] Making holes in Pyrex glass wafers?   Gautham Viswanadam
    • [mems-talk] Making holes in Pyrex glass wafers?   Kirt & Erika Zipf-Williams
      • [mems-talk] Making holes in Pyrex glass wafers?   Bill Flounders
      • [mems-talk] Making holes in Pyrex glass wafers?   Carsten Wesselkamp
  • [mems-talk] Cu Metal Etchant   David Nemeth
  • [mems-talk] Cu Metal Etchant   Kirt & Erika Zipf-Williams
• [mems-talk] AuSn plating.   li gang
• [mems-talk] Making holes in Pyrex glass wafers?   Tomblin, Graham (OH32)
• [mems-talk] Cu Metal Etchant   Lin, Yaojian
• [mems-talk] Re: Frustrated by 2um Nitride   Matt Wasilik
• [mems-talk] AZ4620 supplier   ERIC SIMONE
• [mems-talk] Touch modesensors?and their classification   amith
• [mems-talk] Thermal simulation in matlab   rakesh babu
• [mems-talk] High Resistivity Silicon wafers   Sang H. Lee
• [mems-talk] Poly polishing slurry   Kumar Soma
  • AW: [mems-talk] Poly polishing slurry   Michaela Wullinger
• [mems-talk] RE: Cu Metal Etchant (Luciano Scaltrito)   luciano scaltrito
• [mems-talk] epoxy for fixing fiber on MUMPS   weiwei2
• [mems-talk] PR strip after Mo etching   Koo Myung Kwon
• [mems-talk] Protect backside of Si wafer from TMAH   Pimpin Alongkorn
  • [mems-talk] Protect backside of Si wafer from TMAH   Bill Flounders
    • AW: [mems-talk] Protect backside of Si wafer from TMAH   Michaela Wullinger
      • AW: [mems-talk] Protect backside of Si wafer from TMAH   nga
      • [mems-talk] Protection of backside of chips in TMAH   kris
      • [mems-talk] Protection of backside of chips in TMAH   transene
      • [mems-talk] Protection of backside of chips in TMAH   Oray Orkun Cellek
  • [mems-talk] Protect backside of Si wafer from TMAH   Roger Shile
  • [mems-talk] Protect backside of Si wafer from TMAH   Mario Robles
• [mems-talk] backside protection for KOH/TMAH   Pavel Neuzil
• [mems-talk] Mo etching problem   Pavel Neuzil
• [mems-talk] DSP vs SSP   Brubaker Chad
• [mems-talk] Looking for Capacitive Pressure Sensors   Kevin M Walsh
  • [mems-talk] W anisotropic etch and etch mask   cshen at briontech.com
    • [mems-talk] W anisotropic etch and etch mask   transene
• [mems-talk] AZ4620 supplier   Cain, Mike
• [mems-talk] RE: MEMS material   Jonathan Engel
• [mems-talk] PR strip after Mo etching   BobHendu at aol.com
• [mems-talk] Stiffness constant   shiraka at ixl.u-bordeaux.fr
  • [mems-talk] Stiffness constant   Raj Gupta
• [mems-talk] %5Bmems-talk%5D PR strip after Mo etching&In-Reply-To=   David Springer
• [mems-talk] W anisotropic etch and etch mask   BobHendu at aol.com
• [mems-talk] Holes in wafers.   John Arthur Anderson
• [mems-talk] platinum on SU-8   BobHendu at aol.com
• [mems-talk] Stiffness constant   BobHendu at aol.com
• [mems-talk] MEMS Material !!   Kevin
• [mems-talk] flow in microchannel   mems work
  • [mems-talk] flow in microchannel   Debjyoti Banerjee, Ph.D.
  • [mems-talk] flow in microchannel   Danny Klein
• [mems-talk] SU8 supplier in India   Kalpesh Upadhye
• [mems-talk] drilling holes on glass by electrochemical method   Andrew Liang
  • [mems-talk] drilling holes on glass by electrochemical method   Shay Kaplan
• [mems-talk] flow in microchannel   Bill Moffat
• [mems-talk] Used equipment for HF vapor dry etch of SiO2   Changping
  • [mems-talk] Used equipment for HF vapor dry etch of SiO2   Kirt & Erika Zipf-Williams
    • [mems-talk] Used equipment for HF vapor dry etch of SiO2   Changping
    • [mems-talk] Used equipment for HF vapor dry etch of SiO2   Changping
  • [mems-talk] PECVD of 8" wafer and 3" glass wafer   Honggang Jiang
• [mems-talk] MicroChem Corp (SU-8 Representative in India)   Mark Shaw
• [mems-talk] AZ4620 supplier   ERIC SIMONE
  • [mems-talk] AZ4620 supplier   Sunil Kumar
• [mems-talk] Pyrex glass machining   Sang Hwui Lee
• [mems-talk] MEMS Safe and arm   vinh.pham at ffi.no
• [mems-talk] Used equipment for HF vapor dry etch of SiO2   Andy McQuarrie
  • [mems-talk] Used equipment for HF vapor dry etch of SiO2   Changping
• [mems-talk] sputtered silicon oxide   Torsten Kießling
  • [mems-talk] sputtered silicon oxide   PRAMOD GUPTA
  • [mems-talk] Micro Chip Solutions   Absara Micro Ststems
  • [mems-talk] Re: V-grooves   Romana Maryla Krolikowska
    • [mems-talk] Re: V-grooves   Roger Shile
      • [mems-talk] Re: V-grooves   beaton at npphotonics (Bill Eaton)
    • [mems-talk] Re: V-grooves   Absara Micro Ststems
      • [mems-talk] Re: V-grooves   weiwei2
• [mems-talk] PZT Stacked wafer   Omar Zohni
• [mems-talk] 13um thick resist   anupama at ee.washington.edu
• [mems-talk] Re: sputtered silicon oxide (message 4)   Han Chong
• [mems-talk] Problem with SiO2 adhesion on Al (Metals?)   BobHendu at aol.com
• [mems-talk] Looking for a used Lam oxide etcher 4520I   Helin Ji
  • [mems-talk] Looking for a used Lam oxide etcher 4520I   Greg Ortiz
• [mems-talk] Problem with SiO2 adhesion on Al (Metals?)   Mansoor Naseer
• [mems-talk] About Ti/pt/Au annealing   zzf
• [mems-talk] help   Deepti Terala
  • [mems-talk] help   Christopher F. Blanford
• [mems-talk] Used equipment for HF vapor dry etch of SiO2   anupama at ee.washington.edu
  • [mems-talk] Used equipment for HF vapor dry etch of SiO2   Roger Shile
• [mems-talk] PECVD of 8" wafer and 3" glass wafer   BobHendu at aol.com
• [mems-talk] MEMS Packaging Standards   CHARLIE CUNEO
• [mems-talk] Used critical point dryer   Theodore Chi
  • [mems-talk] Used critical point dryer   Sunil Kumar
• [mems-talk] MEMS foundry services   uc adi
• [mems-talk] Mems safe and arm   vinh.pham at ffi.no
  • [mems-talk] Mems safe and arm   Sunil Kumar
• [mems-talk] help   Justin Borski
• [mems-talk] Backside protection from TMAH   Postlethwaite, Tim
• [mems-talk] poly on psg   CK Lin
• [mems-talk] Residue after Buffered HF etching PSG   Yuyan Wang
• [mems-talk] help   BobHendu at aol.com
• [mems-talk] Etching and Bonding Sapphire ...   Danny Klein
  • [mems-talk] Etching and Bonding Sapphire ...   Mario Robles
• [mems-talk] Water Absorption of PDMS   Christabel Tan
• [mems-talk] 13um thick resist   Sunil Kumar
• [mems-talk] AU electroplating solution   LSWANG
  • [mems-talk] AU electroplating solution   transene
• [mems-talk] where to buy electroplating equipment   Chen-Han Lee
  • [mems-talk] where to buy electroplating equipment   Ashish Chaudhary
  • [mems-talk] where to buy electroplating equipment   Greg Reimann
• [mems-talk] Graphite etchant?   Amol Patil
  • [mems-talk] Graphite etchant?   transene
• [mems-talk] Re: Critical point dryer   Pavel Neuzil
• [mems-talk] Backside protection from TMAH   Phillipe Tabada
• AW: [mems-talk] Mems safe and arm   Pfoertner, Hugo
• [mems-talk] Mems safe and arm   vinh.pham at ffi.no
• [mems-talk] required some information   Sumeet S Bhatia
• [mems-talk] silicon trench wet etching   Yilei Zhang
  • [mems-talk] silicon trench wet etching   ShuTing Hsu
  • [mems-talk] silicon trench wet etching   beaton at npphotonics (Bill Eaton)
    • [mems-talk] Silicon-glass anodic bonding   M. Amien
• [mems-talk] 4 inch Wafers thinning   Marcus Siegert
• [mems-talk] Mems safe and arm   Hardy, Buzz
• [mems-talk] MEMS foundry services   Hardy, Buzz
• [mems-talk] Wet and Dry Etching.   Sungjun Lee
  • [mems-talk] Wet and Dry Etching.   ShuTing Hsu
  • [mems-talk] Wet and Dry Etching.   Isaac Wing Tak Chan
    • [mems-talk] Wet and Dry Etching.   Marcus
• [mems-talk] poly on psg   Hardy, Buzz
• [mems-talk] aluminium electrode   zaini halim
• [mems-talk] Mask size   Tom Fan
  • [mems-talk] Mask size   Dennis Baird
  • [mems-talk] Mask size   David Nemeth
  • [mems-talk] Mask size   Marcus
• [mems-talk] SU-8 Hydrophillic or Hydrophobic?   Sang-Youp Lee
• [mems-talk] suggestion please   ravi shankar
• [mems-talk] Orientation dependence on Si oxidation   Massimiliano Decarli
• [mems-talk] aluminium electrode   David Springer
• [mems-talk] suggestion please   Phillipe Tabada
• [mems-talk] Mask size   Michael D Martin
• [mems-talk] Re: aluminium electrode   Pavel Neuzil
• [mems-talk] RE: Wet and Dry Etching.   Martin.WALKER at oxinst.co.uk
• [mems-talk] Mask size   Werner J. Karl
• AW: [mems-talk] Mask size   Hornung, Michael
• [mems-talk] solutions   Warrensgoldmine at cs.com
• [mems-talk] Pt Etching Problems   Nirmal Govindaraju
• [mems-talk] Pyrex Etch   Tom Fan
  • [mems-talk] Pyrex Etch   Roger Shile
  • [mems-talk] Pyrex Etch   Sunil Kumar
  • [mems-talk] TMAH Process   kris
• [mems-talk] Spin-on process of polyethylene and polypropylene   Lijun Jiang
• [mems-talk] Gold and Aluminum   J W
• [mems-talk] salary question   Thekieun at aol.com
  • [mems-talk] salary question   Dan Kercher
• [mems-talk] Metrology tools   josh wo
  • [mems-talk] Metrology tools   Mighty Platypus
• [mems-talk] Polishing Pad Vendor   Greg Reimann
• [mems-talk] Wet Etch Chemistry for TaN & W   SonarThekdi
• [mems-talk] MEMScap vs coventor   Pawel Janus
• [mems-talk] SU8 supplier in India   Norinco Special Products
• [mems-talk] [Help] Cu etchant   Yoon Seung Wook
• [mems-talk] Alumina wafers   Laura Malatto
  • [mems-talk] Alumina wafers   Indraneel Chatterji
• [mems-talk] Orientation dependence on Si oxidation   Jason Viotty
• [mems-talk] BSOI wafers needed   sandra
• [mems-talk] TMAH Process   David Springer
• [mems-talk] Re: Gold and Aluminum   Glen Landry
• Antwort: [mems-talk] Metrology tools   andreas.machura at leica-microsystems.com
• [mems-talk] Re: Alumina wafers   Masa Rao
• [mems-talk] Desperately seeking MEMS videotape.   joaomachado at earthlink.net
  • [mems-talk] Desperately seeking MEMS videotape.   Shane Jones
  • AW: [mems-talk] Desperately seeking MEMS videotape.   Erik Jung
• [mems-talk] Re: Metrology tools   Tanya Snyder
• [mems-talk] Breakdown voltage of thermal oxide   Rahul Saini
• [mems-talk] Lift off for Pt Alumina wafers   Dipankar Ghosh
• [mems-talk] polysilicon etch back   Yilei Zhang
• [mems-talk] Desperately seeking MEMS videotape.   Jobert van Eisden
• [mems-talk] Breakdown voltage of thermal oxide   Jobert van Eisden
• [mems-talk] Membrane deflection from compressive stress   John Maloney
• [mems-talk] Breakdown voltage of thermal oxide   Gormley, Colin
• [mems-talk] Annealing conidtion for SiN on SiO2   Changping
• [mems-talk] comprresive stress   sbmorrow at mail.goo.ne.jp
  • [mems-talk] comprresive stress   mahdi bagheri
    • [mems-talk] Ormosil   Jim Intrater
• [mems-talk] Desperately seeking MEMS videotape.   Rich Rosenblum
  • [mems-talk] Foundry Services   Omar Zohni
    • [mems-talk] Foundry Services   Chris Kovach
• [mems-talk] [ADMIN] broken autoresponders   Neil Schemenauer
• [mems-talk] Inducing air flow   WriteNCook at aol.com
  • [mems-talk] Inducing air flow   Debjyoti Banerjee, Ph.D.
• [mems-talk] Silicon-glass anodic bonding   Michael D Martin
• [mems-talk] guidance required   om
• [mems-talk] Gold plating   sriramb
  • [mems-talk] Gold plating   Rick Morrison
  • [mems-talk] Gold plating   A.J.Pang at hw.ac.uk
• [mems-talk] Silicon Powder   Tony Ho
• [mems-talk] polysilicon etch back   BobHendu at aol.com
• [mems-talk] double side polishing   Abhinav Bhushan
• [mems-talk] SU8 SEM   Kalpesh Upadhye
• [mems-talk] BCB dulition   Ivan Shubin
• [mems-talk] looking for help in Hg amalgamation and its adhesion   kui-xiang_ma at agilent.com
• [mems-talk] Gold plating   Michael D Martin
• [mems-talk] guidance required   Knighton, Ed
  • [mems-talk] guidance required   mahdi bagheri
• [mems-talk] Question   Michele Finardi
  • [mems-talk] Question   Shane Jones
• [mems-talk] Question   David Springer
• [mems-talk] SU8 SEM   Christopher Blanford
• [mems-talk] Silicon-glass anodic bonding   Hell, Erwin
• [mems-talk] Inducing air flow   Noel Cherowbrier
• [mems-talk] Question: origin of the term "MEMS" (Xuming Zhang)   Zhang Xuming
• [mems-talk] AC voltage   vishwa
• [mems-talk] BSOI wafers needed   sandra
• [mems-talk] RE: origin of the term "MEMS"   John Maloney
• [mems-talk] Silicon-glass anodic bonding   BRAD JOHNSON
• [mems-talk] guidance required   om
• [mems-talk] sir regarding an under water comm.system   srkvadali
• [mems-talk] Si3N4 Dry etch with good selectivity   Jun Chen
  • [mems-talk] Si3N4 Dry etch with good selectivity   Roger Shile
• [mems-talk] BSOI wafers needed   Lawlor, Chris
  • [mems-talk] BSOI wafers needed   Kenneth Smith
• [mems-talk] Etch rate of Cu in BHF   Frank Rasmussen
  • [mems-talk] Etch rate of Cu in BHF   Kirt & Erika Zipf-Williams
• AW: [mems-talk] BCB dulition   Michael Töpper
• [mems-talk] looking for PNN-PZT etchant   choe
• [mems-talk] Re: Si3N4 Dry etch with good selectivity   Pavel Neuzil
• [mems-talk] Foundry Services   Jason Viotty
• [mems-talk] Q: tantalum silicide   Ramesh C
• [mems-talk] 10um 100mm wafers   Kenneth Smith
• [mems-talk] RE: Gold plating   zzf
• [mems-talk] SF6 Glas etching   Blunier, Stefan
• [mems-talk] Si3N4 Dry etch with good selectivity   BobHendu at aol.com
• [mems-talk] RE: Piezoresistor alignment   Jonathan Engel
• [mems-talk] BSOI wafers needed   Ultrasil at aol.com
• [mems-talk] Piezoresistor alignment   sriramb
• [mems-talk] Preparing and patterning glass frit for wafer bonding   A.K.Ismail
• [mems-talk] re: polyimide chemical etch resistance   CK Lin
• [mems-talk] Ni/V Sputtering   David Ovrokzky
• [mems-talk] Mask Clean   Lin, Yaojian
  • [mems-talk] Mask Clean   Mighty Platypus
    • [mems-talk] Mask Clean   Hong Wu
    • [mems-talk] Mask Clean   Kirt & Erika Zipf-Williams
• [mems-talk] Looking For Silicon Vendors   Saravana Natarajan
• [mems-talk] Mask Clean   anupama at ee.washington.edu
• [mems-talk] Help?   denzil roberts
• [mems-talk] backside protection for KOH/TMAH   David Ovrokzky
• [mems-talk] Q factor for metallic microcantilevers   W.H. Teh
• [mems-talk] please post my question   Byunghoon Bae
• [mems-talk] LAM etcher troubles   Luckett, James T

Last message date: Thu Jul 31 17:59:53 EST 2003
Archived on: Fri Aug 1 10:27:38 EST 2003

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...