[mems-talk] Glas Frit Bonding

[Gary]

Erik, from what you describe below, it sounds like an incompatible CTE as 
between the two materials that you are bonding, slow cooling only reduces 
the shock not the final stress. Gary

-----Original Message-----
From:	Erik Jung [SMTP:erju at izm.fhg.de]
Sent:	Wednesday, December 13, 2006 8:27 AM
To:	'General MEMS discussion'
Subject:	[mems-talk] Glas Frit Bonding

Dear all,
When bonding Si with glass (borofloat 33) using Ferro FX036 with ~40?m
(prefired) thickness, I don?t obtain good mechanical strength. Same process
with glass/glass and Si/Si works perfectly.
A cooldownrate of less than 13K/min has been used.
Do you have any suggestions here?
Regards!
Erik

_______________________________________________
Hosted by the MEMS and Nanotechnology Exchange, the country's leading
provider of MEMS and Nanotechnology design and fabrication services.
Visit us at http://www.mems-exchange.org

Want to advertise to this community?  See http://www.memsnet.org

To unsubscribe:
http://mail.mems-exchange.org/mailman/listinfo/mems-talk
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.15.18/585 - Release Date: 12/13/06 
11:49 AM


--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.15.18/585 - Release Date: 12/13/06 
11:49 AM