[mems-talk] PDMS to ITO coated glass bonding

[Bhamidipati srikalyan]

Dear All,


I woulkd like to know if there is any procedure similar to the bonding of
PDMS to glass to bond ITO-coated glass to PDMS.  I would be greatful for the
suggestions.

The other problem is, i would like to make PDMS gels of variable young's
modulus.  I have tried  varying the composition of crosslinker to base
polymer for the Sylgard-184 kit. The problem i faced while doing this is
that the gel that is formed is very sticky due to the the uncured PDMS
oligomers.  I would be grateful if someone suggests me to overcome this
problem or suggest a new method for making  soft gels.

Thanking you,
-- 
V.S.Sri Kalyan.B
e-mail:- srikalyan at chemeng.iisc.ernet.in
ME, CHemical Engineering,
Indian Institute of Science,
Bangalore-12.
CELL1:9246546995
CELL2:9986704699