October 2006 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Oct 2 07:27:36 EDT 2006
Ending: Tue Oct 31 14:08:32 EDT 2006
Messages: 169

• [mems-talk] Etching Ag   Peter Svasek
• [mems-talk] Photoresist with smooth and high resolution sidewall   Hsiu-Jen Wang
  • [mems-talk] Photoresist with smooth and high resolution sidewall   Isaac Chan
• [mems-talk] for electroplating informations   Feng-Yuan Zhang
• [mems-talk] Polymerisation of PDMS   RABBIA Laurent
  • [mems-talk] Polymerisation of PDMS   Gareth Jenkins
  • [mems-talk] Polymerisation of PDMS   Matthew Davies
• [mems-talk] Photoresist with smooth and high resolution sidewall   Bill Moffat
• [mems-talk] Polymerisation of PDMS   Barbara Cortese
• [mems-talk] Metal Paste for Screen Printing   Vikrant A. Chaudhari
• [mems-talk] How to get vertical sidewall for TOK PMER P-LA900PM?   Ren Yang
• [mems-talk] Gold plating through a via hole   deepa sree
• [mems-talk] Gold plating through a via hole   Gary
• [mems-talk] How to get vertical sidewall for TOK PMER P-LA900PM?   Bill Moffat
• [mems-talk] advantage of platinum over gold for micro-fluidic sensing   rupesh sawant
  • [mems-talk] advantage of platinum over gold for micro-fluidic sensing   daniele malleo
  • [mems-talk] Integration problem!!   madhav rao
  • [mems-talk] Nickel dots selective removal!!   madhav rao
• [mems-talk] Re: Metal Paste for Screen Printing   Tom Rust
• [mems-talk] AW: MEMS-talk Digest, Vol 47, Issue 26   A.E.Reinhardt
  • [mems-talk] AW: MEMS-talk Digest, Vol 47, Issue 26   Roger Shile
• [mems-talk] Nickel nanodots annealing!!   madhav rao
  • [mems-talk] how to pattern PDMS film   Jianhua Tong
• [mems-talk] Electrical contact on organic samples   jpt sharma
  • [mems-talk] Electrical contact on organic samples   g.balsubra manian
  • [mems-talk] Electrical contact on organic samples   Kirt Williams
    • [mems-talk] Electrical contact on organic samples   jpt sharma
• [mems-talk] via metallization   preeti sharma
• [mems-talk] How to Get a mirror-like surface of silicon(100) using KOH wet silicon etch.   XiongHeng
  • [mems-talk] How to Get a mirror-like surface of silicon(100) using KOH wet silicon etch.   Tao
    • [mems-talk] How to Get a mirror-like surface of silicon(100)using KOH wet silicon etch.   Wilson, Thomas
  • [mems-talk] How to Get a mirror-like surface of silicon(100) using KOH wet silicon etch.   LSujatha
• [mems-talk] the dose of print for AZ P4620   Xiaoguang "Leo" Liu
• [mems-talk] photoresist peeled off together with PDMS   Bo Bob Huo
  • [mems-talk] photoresist peeled off together with PDMS   Mike Pinelis
  • 答复: [mems-talk] photoresist peeled off together with PDMS   jianshi
• Fwd: [mems-talk] Re: Metal Paste for Screen Printing   Tom Rust
• [mems-talk] Regarding Indium Electroplating solution   ahajjiah at vt.edu
• [mems-talk] Question about tri-layer resist.   Xiaojing Zou
  • [mems-talk] Question about tri-layer resist.   Isaac Chan
• [mems-talk] photoresist peeled off together with PDMS   Bill Moffat
• [mems-talk] Re: Electrical contact on organic samples. MEMS-talk Digest, Vol 48, Issue 5   huy vo
• [mems-talk] the dose of print for AZ P4620   Zhang Xiao Qiang
  • [mems-talk] the dose of print for AZ P4620   Isaac Chan
• [mems-talk] PMMA bonding with su8   jianshi
• [mems-talk] Re:How to Get a mirror-like surface of silicon(100) using KOH wet silicon etch   abhaya joshi
• [mems-talk] Bonding PMMA and SU8   jianshi
  • [mems-talk] Bonding PMMA and SU8   Mike Pinelis
• [mems-talk] How to Get a mirror-like surface of silicon(100) usingKOH wet silicon etch.   Michael D Martin
• [mems-talk] Spin On Passivation (glass or polyimide)   Lou Chomas
• [mems-talk] How to Get a mirror-like surface   st20000
• [mems-talk] Small SU-8 Pillars   Kevin Christ
• [mems-talk] Small SU-8 Pillars   shay at mizur.com
• [mems-talk] Polyurethane molding   RABBIA Laurent
  • [mems-talk] Polyurethane molding   Mike Pinelis
• [mems-talk] Platinum and/or Nickel bonding wires   jamshidi at newton.berkeley.edu
• [mems-talk] Polyurethane molding   Huaibin Zhang
• [mems-talk] photoresist peeled off together with PDMS   Bo Bob Huo
  • [mems-talk] photoresist peeled off together with PDMS   Gareth Jenkins
    • [mems-talk] AZ 9260   sebastian wicklein
      • [mems-talk] AZ 9260   Isaac Chan
• [mems-talk] recommendation for wafer polishing service?   Patrick Lu
• [mems-talk] RIE equipment   ioana voiculescu
• [mems-talk] photoresist peeled off together with PDMS   Huaibin Zhang
  • [mems-talk] photoresist peeled off together with PDMS   Roger Shile
• [mems-talk] silocsan   Jose Maria Delgado Sanchez
  • [mems-talk] silocsan   Jesse D Fowler
• [mems-talk] photoresist peeled off together with PDMS   Huaibin Zhang
• [mems-talk] Oxygen precipitates & KOH etching   Shivalik Bakshi
• [mems-talk] AZ 9260   Bill Moffat
• [mems-talk] Resonant freqeuncy measurement of a cantilever   mlists at pw-websolutions.com
• [mems-talk] amorphous Si ethcing   Young Rae Hong
  • [mems-talk] amorphous Si ethcing   Isaac Chan
    • [mems-talk] amorphous Si ethcing   Ankush Singal
• [mems-talk] Bubble formation in mircochannels.   Vishwa
  • [mems-talk] Bubble formation in mircochannels.   Torsten Wagner
    • [mems-talk] Bubble formation in mircochannels.   Laura Malatto
  • [mems-talk] Bubble formation in mircochannels.   Kevin Christ
• [mems-talk] Bubble formation in mircochannels.   Huaibin Zhang
• [mems-talk] KOH concentrion   Badr Omrane
• [mems-talk] Leaned channels etched in silicon   RABBIA Laurent
• [mems-talk] Bubble formation in mircochannels.   Beggans Michael H IHMD
• [mems-talk] photoresist peeled off together with PDMS   Bo Bob Huo
  • [mems-talk] photoresist peeled off together with PDMS   Mike Pinelis
• [mems-talk] How to recalibrate a zero volt ionizer   jiaxing Yang
• [mems-talk] PDMS bubble formation...   g.balsubra manian
• [mems-talk] photoresist peeled off together with PDMS   Huaibin Zhang
• [mems-talk] two layer fabrication by AZ P4620 and SU8 2050?   qingye lu
• [mems-talk] To remove Al layer from PMMA/glass substrate   Hyunsoo Park
• [mems-talk] To remove Al layer from PMMA/glass substrate   Mathieu Foquet
  • [mems-talk] To remove Al layer from PMMA/glass substrate   Hyunsoo Park
    • [mems-talk] To remove Al layer from PMMA/glass substrate   Mathieu Foquet
• [mems-talk] amorphous Si ethcing   Young Rae Hong
• [mems-talk] PDMS bubble formation...   Huaibin Zhang
• [mems-talk] two layer fabrication by AZ P4620 and SU8 2050?   Huaibin Zhang
• [mems-talk] Partial Metallization of Vertical Walls   Xiaoguang "Leo" Liu
  • [mems-talk] Partial Metallization of Vertical Walls   Florian Herrault
• [mems-talk] Partial Metallization of Vertical Walls   Huaibin Zhang
  • [mems-talk] Partial Metallization of Vertical Walls   Xiaoguang "Leo" Liu
    • [mems-talk] Partial Metallization of Vertical Walls   g.balsubra manian
      • [mems-talk] Nickel evaporation on PMMA!!!   madhav rao
      • [mems-talk] Nickel evaporation on PMMA!!!   Michael Rust
      • [mems-talk] Nickel evaporation   madhav rao
      • [mems-talk] Nickel evaporation   Brent Garber
• [mems-talk] AZ 4620 as the mask of DRIE   Hsiu-Jen Wang
  • [mems-talk] AZ 4620 as the mask of DRIE   Pradeep Dixit
• [mems-talk] Re: two layer fabrication by AZ P4620 and SU8 2050?   qingye lu
• [mems-talk] photoresist peeled off together with PDMS   huy vo
• [mems-talk] two layer fabrication by AZ P4620 and SU8 2050   huy vo
• [mems-talk] How to bond PMMA to glass?   Le Cao Hoai Nam
• [mems-talk] Bubble formation in mircochannels.   Vishwa
• [mems-talk] Help in diamond etch   Ho Yin Chan
• [mems-talk] Partial Metallization of Vertical Walls   Beggans Michael H IHMD
  • [mems-talk] Partial Metallization of Vertical Walls   Xiaoguang "Leo" Liu
• [mems-talk] Problem about Al sputtering   Qiao Dayong
• [mems-talk] How to etch Chrome in Copper/Chrome Metalization?   Michael D Martin
• [mems-talk] Problem about Al sputtering   Gary
• [mems-talk] AZ 4620 as the mask of DRIE   Brubaker Chad
• [mems-talk] Nickel deposition technique!   madhav rao
  • [mems-talk] Nickel deposition technique!   g.balsubra manian
    • [mems-talk] Nickel deposition technique!   David Nemeth
    • [mems-talk] Nickel deposition technique!   madhav rao
• [mems-talk] Surface Cleaning of Cu and Via   GQ Chu
• [mems-talk] About Silver electrodes in MEMS   Digtiger
• [mems-talk] Curing Ebecryl 270.,   g.balsubra manian
• [mems-talk] polyimide   Yogendra Yadav_04322601
  • [mems-talk] Nickel wet etching   prabhu arumugam
    • [mems-talk] Nickel wet etching   Roger Shile
  • [mems-talk] polyimide   Hsiu-Jen Wang
    • [mems-talk] Anyone know what this thing called and where to buy it from? Chip carrier? Chip bonding packaging pad?   Guangchi Archie Xuan
      • AW: [mems-talk] Anyone know what this thing called and where to buy itfrom? Chip carrier? Chip bonding packaging pad?   Erik Jung
      • [mems-talk] Anyone know what this thing called and where to buy it from? Chip carrier? Chip bonding packaging pad?   Bill Flounders
• [mems-talk] Schottky contacts   Iñigo Petrina Jauregui
• [mems-talk] cfd software   michael_cooke at ici.com
• [mems-talk] polyimide (Yogendra Yadav_04322601)   Lung-hao Hu
• [mems-talk] Microwire deposition!!   madhav rao
• [mems-talk] Flocking   Chetan C. Hire
• [mems-talk] RE: Anyone know what this thing called and where to buy it from?   Zhang Xuming
  • [mems-talk] RE: Anyone know what this thing called and where to buyit from?   Adamson, Steve
• [mems-talk] pinhole free metallization   Tao
  • [mems-talk] pinhole free metallization   Manish Hooda
• [mems-talk]Question about Chemical Vapor Deposition Techniques   Tianming
  • [mems-talk]Question about Chemical Vapor Deposition Techniques   mohendra roy
• [mems-talk] low growing rate and destroy of the AZ P4620 pattern while electroplating of NiP   Zhang Xiao Qiang
• [mems-talk] A question about Keithley 6221 AC and DC current source   jiaxing Yang
• [mems-talk] CF4 plasma treatment   amron gary
• [mems-talk] Re: Pinhole Free Metalization   Manish Kumar
• [mems-talk] RF MEMS Filter   Fokhrul Islam
  • [mems-talk] RF MEMS Filter   wahid YEMI.
• [mems-talk] TRION Mini-lock II etcher   Bhavin Bijlani
• [mems-talk] Wire bonders.   WILLIAMSON Fraser
• [mems-talk] Gold were elctroplating onto the edge of photoresist   胡小东
  • [mems-talk] Gold were elctroplating onto the edge of photoresist   Adamson, Steve
• [mems-talk] Gold were elctroplating onto the edge of photoresist   Michael D Martin
  • [mems-talk] HV power supply   Rajib Ahmed
• [mems-talk] surface roughness and parameters   Barbara Cortese
• [mems-talk] To avoid micro loading effect after RIE   Hyunsoo Park
• [mems-talk] Etching Ag   Kevin
• [mems-talk] Back side Al protection during long TMAH etching   Le Cao Hoai Nam
• [mems-talk] CAD tool for MEMS   anu67 at sancharnet.in
• [mems-talk] Wet etching SiN with photoresist   蘇俊榮 Chun-Jung Su
  • [mems-talk] Wet etching SiN with photoresist   Scott McWilliams
  • [mems-talk] Wet etching SiN with photoresist   R Zhang, Electrical & Electronic Engineering
• [mems-talk] To avoid micro loading effect after RIE   Qiao Dayong
• [mems-talk] Bridge Capacitance Cb in DMTL PHASE SHIFTER   Janardhana Ksheersagar
• [mems-talk] to get thin SU-8 film   stefano.park at gmail.com
• [mems-talk] coating a second layer of Su8...   Vishwa
• [mems-talk] KOH etching - low concentrations   Rasmussen Peter Andreas
• [mems-talk] Wet etching SiN with photoresist   Avi Laker

Last message date: Tue Oct 31 14:08:32 EDT 2006
Archived on: Tue Oct 31 14:31:44 EDT 2006

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...