September 2006 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Sep 1 01:23:04 EDT 2006
Ending: Sat Sep 30 00:32:33 EDT 2006
Messages: 195

• [mems-talk] Regarding Glass lithography   walter essinger
  • [mems-talk] Regarding Glass lithography   Xiaoguang "Leo" Liu
    • [mems-talk] Regarding Glass lithography   walter essinger
• [mems-talk] Metal mask for DRIE   Florian Herrault
  • [mems-talk] Metal mask for DRIE   Xiaoguang "Leo" Liu
• [mems-talk] Photoresist Hard Bake question   Bill Moffat
• [mems-talk] contact angle measurement equipment needed   Bill Moffat
  • [mems-talk] contact angle measurement equipment needed   Xiaoguang "Leo" Liu
• [mems-talk] Metal mask for DRIE   shay kaplan
  • [mems-talk] Metal mask for DRIE   Hongjun-ECE
    • [mems-talk] Metal mask for DRIE   Nicolas Duarte
• [mems-talk] Metal mask for DRIE   Nicolas Duarte
• [mems-talk] Metal mask for DRIE   Xiaoguang "Leo" Liu
• [mems-talk] Metal mask for DRIE   Hongjun-ECE
• [mems-talk] Metal mask for DRIE   gilgunn
• [mems-talk] RE: Metal mask for DRIE   Marco Doms
• [mems-talk] contact angle measurement equipment needed   Bill Moffat
• [mems-talk] Photoresist Hard Bake question   Robert Black
• [mems-talk] KOH etching   LSujatha
  • [mems-talk] KOH etching   Jeehwan
• [mems-talk] Diffusion mask   Roger Brennan
• [mems-talk] Cutting chips with fragile free-standing devices into small pieces   D. Zhou
  • [mems-talk] Cutting chips with fragile free-standing devices into small pieces   Nicolas Duarte
  • [mems-talk] Cutting chips with fragile free-standing devices into small pieces   Torsten Wagner
    • [mems-talk] Cutting chips with fragile free-standing devices intosmall pieces   gilgunn
  • [mems-talk] Cutting chips with fragile free-standing devices intosmall pieces   Kagan Topalli
• [mems-talk] dissolving cured epoxy glue   Mohammad Najmzadeh
  • [mems-talk] dissolving cured epoxy glue   ssood
    • [mems-talk] dissolving cured epoxy glue   Mohammad Najmzadeh
• [mems-talk] dissolving cured epoxy glue   garber at engr.uconn.edu
• [mems-talk] Cutting chips with fragile free-standing devices intosmall pieces   Michael D Martin
• [mems-talk] searching for photoresist   Sven Passinger
• [mems-talk] LCD cells   Yair Gannot
• [mems-talk] Metal mask for DRIE   Pradeep Dixit
  • [mems-talk] metal etching with the thickness > 30 um   Feng-Yuan Zhang
• [mems-talk] Washing-away problem in non-conductive substrate EBL   Hongjun-ECE
  • [mems-talk] Washing-away problem in non-conductive substrate EBL   Michael Rust
    • [mems-talk] Washing-away problem in non-conductive substrate EBL   Hongjun-ECE
• [mems-talk] device passivation layer   Xiaoyong_Liu
  • [mems-talk] device passivation layer   VS Bhat
  • [mems-talk] device passivation layer   walter essinger
• [mems-talk] floating a thin polymer layer off a substarte   Ning Wu (nwu at Princeton.EDU)
  • [mems-talk] floating a thin polymer layer off a substarte   walter essinger
• [mems-talk] HF resistance materials that have conductivity   Jeehwan Kim
  • [mems-talk] HF resistance materials that have conductivity   Shay Kaplan
  • [mems-talk] HF resistance materials that have conductivity   LSujatha
  • [mems-talk] HF resistance materials that have conductivity   Kirt Williams
• [mems-talk] Generating Small capacitances for measurement   Andrew O'Grady
• [mems-talk] p++ silicon membrane   sebastian wicklein
  • [mems-talk] Cr etching and GaAs etching with Cl2 gas   weidong zhou
• [mems-talk] Adhesive layer for gold on oxide and patterning   J.J HU
  • [mems-talk] Adhesive layer for gold on oxide and patterning   walter essinger
  • [mems-talk] Adhesive layer for gold on oxide and patterning   Kirt Williams
• [mems-talk] SU-8 adhesion problem   aeroalto
  • [mems-talk] Carbon Sputtering Versus Evaporation   Sreemanth M Uppuluri
• [mems-talk] DRIE etching   Shankar Dutta
  • [mems-talk] DRIE etching   Nicolas Duarte
    • [mems-talk] DRIE etching   K A Chan
      • [mems-talk] DRIE etching   Nicolas Duarte
      • [mems-talk] DRIE etching   Isaac Chan
  • [mems-talk] DRIE etching   gilgunn
  • [mems-talk] DRIE etching   Pradeep Dixit
  • [mems-talk] DRIE etching   Manish Hooda
• [mems-talk] Wet etching of Quartz wafer   Lin Yu
  • [mems-talk] Wet etching of Quartz wafer   Jesse D Fowler
    • [mems-talk] Wet etching of Quartz wafer   Jesse D Fowler
• [mems-talk] device passivation layer   Viswanadam, Gautham
• [mems-talk] Photoresist Hard Bake question   Borski, Justin
• [mems-talk] DRIE etching   Michael D Martin
• [mems-talk] RE: Micro-dispenser   Charmet Jérôme
• [mems-talk] SU-8 adhesion problem   Bill Moffat
  • [mems-talk] SU-8 adhesion problem   Mike Pinelis
• [mems-talk] about AZ P4620   Crystalmems
• [mems-talk] SU-8 adhesion problem   Brubaker Chad
• [mems-talk] SU-8 adhesion problem   Bill Moffat
• [mems-talk] boron membrane on Si-Wafer   sebastian wicklein
  • [mems-talk] boron membrane on Si-Wafer   neal at zbzoom.net
• [mems-talk] DRIE etching   Nicolas Duarte
  • [mems-talk] DRIE etching   Isaac Chan
• [mems-talk] Problem of photoresist removal   Ravi Shankar
• [mems-talk] DRIE etching   Nicolas Duarte
• [mems-talk] un-steep wall for AZ 4620   Zhang Xiao Qiang
• [mems-talk] boron doped Silicon   sebastian wicklein
• [mems-talk] Glass frit coating, masking, and patterning   Kagan Topalli
• [mems-talk] un-steep wall for AZ 4620   Bill Moffat
• [mems-talk] un-steep wall for AZ 4620   Brubaker Chad
  • [mems-talk] un-steep wall for AZ 4620   Zhang Xiao Qiang
• [mems-talk] Glass frit coating, masking, and patterning   Brubaker Chad
• [mems-talk] Organic   l ll
• [mems-talk] germanium wet isotropic etch   Andrea Mazzolari
• [mems-talk] Br-IBAE, which metal to use for masking?   vaibhav mathur
• [mems-talk] boron membrane on Si-Wafer   sebastian wicklein
• [mems-talk] Small black particles falling down during SiO2 dry etch in AMS200   Weber, Carsten - LT
  • [mems-talk] Small black particles falling down during SiO2 dry etch in AMS200   Ngo Ha Duong
  • AW: [mems-talk] Small black particles falling down during SiO2 dry etch in AMS200   Michael Prömpers
• [mems-talk] A Queston about How to Deposit SiCr   J.J wang
• [mems-talk] Setting up a small plasma etch system   Stuart Field
  • [mems-talk] Setting up a small plasma etch system   bobhendu at aol.com
  • [mems-talk] How to deposit reliable amorphous C film?   Darius
• [mems-talk] Does anyone have this chemical (CAS#17070-70-1)?   Jeff chen
• [mems-talk] Gold etching problem   Sarah McQuaide
• [mems-talk] Gold etching problem   garber at engr.uconn.edu
• [mems-talk] PVDF Plates   Lijo Paul
• [mems-talk] Photoresist for Polystyrene   Kristina Thomas
• [mems-talk] Angular Position Sensor.   Carla Pepe
  • [mems-talk] Inkjet printer head fabrication   K A Chan
    • [mems-talk] Inkjet printer head fabrication   Shay Kaplan
• [mems-talk] PDMS bond to silicon nitride   Cheng Ming Lin
• [mems-talk] AMMT's ECES potentiostat   li gang
• [mems-talk] Minimum feature size using wet etching - 3micro-m?   Martyn Gadsdon
  • [mems-talk] Minimum feature size using wet etching - 3micro-m?   Scott McWilliams
    • [mems-talk] Minimum feature size using wet etching - 3micro-m?   Shay Kaplan
  • [mems-talk] Minimum feature size using wet etching - 3micro-m?   Rob Knobel
• [mems-talk] regd etching of Ni-Fe alloys   mukul jain
• [mems-talk] glass frit technique   fulvio gior
• [mems-talk] Minimum feature size using wet etching - 3micro-m?   Feng-Yuan Zhang
• [mems-talk] Minimum feature size using wet etching - 3micro-m?   Bill Moffat
• [mems-talk] Etching Silicon   l ll
  • [mems-talk] Etching Silicon   Isaac Chan
    • [mems-talk] Etching Silicon   Tao
• [mems-talk] Ebecryl 270   g.balsubra manian
• [mems-talk] Etching Silicon   l ll
• [mems-talk] crucible material for evaporating Al   luhao
  • [mems-talk] crucible material for evaporating Al   Bin Liu
  • [mems-talk] crucible material for evaporating Al   Shay Kaplan
    • [mems-talk] Dry etch selectivity between Al and PMMA   Xiaojing Zou
      • [mems-talk] reducing stress in sputtered TiW   Jan Michael Kubr
• [mems-talk] Dry etch selectivity between Al and PMMA   Mathieu Foquet
  • [mems-talk] Dry etch selectivity between Al and PMMA   Xiaojing Zou
• [mems-talk] Ohmic contact on Si   jpt sharma
  • [mems-talk] Ohmic contact on Si   Borski, Justin
• [mems-talk] Need info about coatings   amron gary
• [mems-talk] crucible liner for evaporating Ta   malxj at tom.com
• [mems-talk] Ohmic Contact to p-type Si   Nannan Chen
  • [mems-talk] Ohmic Contact to p-type Si   Tao
• [mems-talk] Re: ohmic contact on Si   Ravi Shankar
• [mems-talk] HSQ etch mask   l ll
  • [mems-talk] PMMA burned during Ion milling   Xiaojing Zou
• [mems-talk] Small black particles falling down during SiO2 dry etch   abdelyamine
• [mems-talk] boron stain   Tao
  • [mems-talk] boron stain   Roger Brennan
• [mems-talk] Dry etch selectivity between Al and PMMA   Michael D Martin
• [mems-talk] Wet etching of PMMA Wafers   Vishal Singhal
• [mems-talk] evaporation deposition   Rupesh Sawant
  • [mems-talk] evaporation deposition   Karthik Sriram Lakshmi Narasimhan
  • [mems-talk] evaporation deposition   J.J wang
    • [mems-talk] evaporation deposition   prabhu arumugam
    • [mems-talk] evaporation deposition   bdaly at evapcoat.com
• [mems-talk] Problems with my Ti/Au wet etching process   ahajjiah at vt.edu
  • [mems-talk] looking for high power lamps   li cai
  • [mems-talk] Problems with my Ti/Au wet etching process   Brad Cantos
• [mems-talk] Silicon etching   l ll
• [mems-talk] glass rods   Po-Jui Chen
  • [mems-talk] glass rods   shay kaplan
• [mems-talk] Simulation Program   Jordi Teva
  • [mems-talk] Simulation Program   Roger Brennan
  • [mems-talk] Simulation Program   Oguz Elibol
• [mems-talk] electroplating on PDMS   g.balsubra manian
  • [mems-talk] electroplating on PDMS   Imran Ghauri
    • [mems-talk] electroplating on PDMS   g.balsubra manian
• [mems-talk] Re: Problems with my Ti/Au wet etching process   Vinay
  • [mems-talk] Re: Problems with my Ti/Au wet etching process   ahajjiah at vt.edu
    • [mems-talk] Re: Problems with my Ti/Au wet etching process   Brad Cantos
      • [mems-talk] Re: Problems with my Ti/Au wet etching process   deepa sree
• [mems-talk] printer for photomask production   Barbara Cortese
• [mems-talk] polyimide   Yogendra Yadav_04322601
• [mems-talk] Wet etching of PMMA Wafers   abhaya joshi
• [mems-talk] BaCu and YtCu Cosputtering   Oliver Horn
• [mems-talk] Re: Problems with my Ti/Au wet etching process   Vinay
  • [mems-talk] Re: Problems with my Ti/Au wet etching process   Roger Shile
• [mems-talk] low temperature metal to metal/semicond ohmic contact   Florian Herrault
• [mems-talk] Creating photomasks using PC printers   bdaly at evapcoat.com
  • [mems-talk] Creating photomasks using PC printers   Darius
• [mems-talk] Piezoresistor   Siripon Sukuabol
• [mems-talk] photoresist multiple coating   Abhishek Jain
  • [mems-talk] photoresist multiple coating   abdou sar
• [mems-talk] Gold protection during long TMAH etching   Martyna Grydlik
• [mems-talk] Simulation Program   Roger Brennan
• [mems-talk] Multiple coats of AZ P4620   Saravana P. Natarajan
  • [mems-talk] Multiple coats of AZ P4620   Zhang Xiao Qiang
• [mems-talk] Silicon wafer distributor   Joseph Zhu
• [mems-talk] Shipley 812 Photoresist   Vishal Singhal
• [mems-talk] Etching Ag   Benyimin Hadad
  • [mems-talk] Etching Ag   Keven_Yu at amat.com
    • [mems-talk] Etching Ag   PRAMOD GUPTA
• [mems-talk] the dose of print for AZ P4620   Zhang Xiao Qiang
  • [mems-talk] the dose of print for AZ P4620   Isaac Chan
• [mems-talk] Photoresist with smooth and high resolution sidewall   Hsiu-Jen Wang
  • [mems-talk] Photoresist with smooth and high resolution sidewall   Roger Shile
    • [mems-talk] Photoresist with smooth and high resolution sidewall   Hsiu-Jen Wang
      • [mems-talk] Photoresist with smooth and high resolution sidewall   Isaac Chan
• [mems-talk] Photoresist with smooth and high resolution sidewall   Bill Moffat
  • [mems-talk] Photoresist with smooth and high resolution sidewall   Hsiu-Jen Wang
• [mems-talk] Multiple coats of AZ P4620   Brubaker Chad
• [mems-talk] Ni residue (?) when sputtered Ni was removed by Transene Ni etchant TFB or Type I   EUNKI HONG

Last message date: Sat Sep 30 00:32:33 EDT 2006
Archived on: Sat Sep 30 12:19:05 EDT 2006

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...