February 2007 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu Feb 1 06:11:29 EDT 2007
Ending: Wed Feb 28 17:11:00 EDT 2007
Messages: 147

• [mems-talk] Metal coatings for hot-embossing tools   Gareth Jenkins
• [mems-talk] Copper plating on Aluminum seed layer   Sebastian Sosin
  • [mems-talk] Copper plating on Aluminum seed layer   Xiaoguang "Leo" Liu
  • [mems-talk] Copper plating on Aluminum seed layer   IGOR KADIJA
• [mems-talk] Help with RIE chemistries and removing hard baked Photoresist.   Martyn Gadsdon
• [mems-talk] How to decrease TTV ?   jeff besterman
• [mems-talk] Re: Copper plating on Aluminum seed layer   Eric Sanjuan
• [mems-talk] Which one have higher oxidation rate at Rm temp(Si(100) or Polysilicon)   wanhong Cheung
• [mems-talk] HI   mohendra roy
  • [mems-talk] HI   Kirt Williams
• [mems-talk] Ultra flat silicon wafers   Andrea Mazzolari
• [mems-talk] Equipment for ramped heating   Peng Li (Paul)
  • [mems-talk] Equipment for ramped heating   pinelis at umich.edu
    • [mems-talk] Equipment for ramped heating   Peng Li (Paul)
      • [mems-talk] Equipment for ramped heating   Gareth Jenkins
• [mems-talk] Could you recommend me an oven with cooling rate controlled?   Jeff chen
• [mems-talk] Wafer carriers   Xiaoguang "Leo" Liu
• [mems-talk] IR hotplate for softbaking SU-8   Robert O'Callahan
  • [mems-talk] Re: IR hotplate for softbaking SU-8   Ken Healy
• [mems-talk] Copper plating   Nik Dee
  • [mems-talk] Copper plating   Shay Kaplan
• [mems-talk] etching AuSn 80-20   Benyimin Hadad
  • [mems-talk] etching AuSn 80-20   David Nemeth
• [mems-talk] DRIE etching : how to enlarge the cavities   RABBIA Laurent
  • [mems-talk] DRIE etching : how to enlarge the cavities   Ngo Ha Duong
  • [mems-talk] DRIE etching : how to enlarge the cavities   Roger Shile
• [mems-talk] Re: Copper plating   imran ali
• [mems-talk] deposit alloy   B Frank
  • [mems-talk] deposit alloy   David Nemeth
    • [mems-talk] deposit alloy   B Frank
• [mems-talk] DRIE etching : how to enlarge the cavities   Beggans Michael H IHMD
• [mems-talk] Wafer flatness   Andrea Mazzolari
• [mems-talk] P-type Doped LPCVD Grown Polysilicon Etch   Rana, Mukti M
• [mems-talk] pH of NiP plating bath   Zhang Xiao Qiang
• [mems-talk] anodic bonding of glass and si   Daniela Kögler
  • [mems-talk] anodic bonding of glass and si   Roger Shile
  • [mems-talk] anodic bonding of glass and si   Edward Castellana
  • [mems-talk] anodic bonding of glass and si   Bill Moffat
• [mems-talk] I'm looking for storage containers   Andrea Mazzolari
• [mems-talk] Carriers   Mac McReynolds
• [mems-talk] pH adjusting of NiP plating bath   Zhang Xiao Qiang
• [mems-talk] Precipitate during KOH etching   sheeja mathew
  • [mems-talk] Precipitate during KOH etching   Ravi Shankar
  • [mems-talk] Precipitate during KOH etching   Thomas Xu
    • [mems-talk] silicon nitride windows/membranes   Joseph Grogan
      • [mems-talk] Sol-Gel Silicon oxide   Hichham-ElDin
      • [mems-talk] Sol-Gel Silicon oxide   Rashid, Mamun
      • [mems-talk] Sol-Gel Silicon oxide   Hichham-ElDin
      • [mems-talk] Sol-Gel Silicon oxide   Rashid, Mamun
• [mems-talk] DRIE of SiC   Miyakawa, Natsuki
• [mems-talk] through etch using LF in drie   ashwini jambhalikar
  • [mems-talk] through etch using LF in drie   Martin J Prest
• [mems-talk] Refractive Index of Photoresists   Martyn Gadsdon
  • [mems-talk] Refractive Index of Photoresists   Robert Black
    • [mems-talk] Refractive Index of Photoresists   mohendra roy
  • [mems-talk] Refractive Index of Photoresists   Bill Moffat
    • [mems-talk] Refractive Index of Photoresists   Roger Shile
      • [mems-talk] Refractive Index of Photoresists   Bill Moffat
  • [mems-talk] Refractive Index of Photoresists   Shay Kaplan
• [mems-talk] Adhesion Mechanism between HMDS and PMMA   CLAUDIO T MUNOZ
  • [mems-talk] Adhesion Mechanism between HMDS and PMMA   Bill Moffat
• [mems-talk] CYTOP   Li, Lin (UMC-Student)
• [mems-talk] thermal shock of sapphire wafers   Goodwin, Scott
  • [mems-talk] thermal shock of sapphire wafers   garyh at s-cubed.com
• [mems-talk] thermal shock of sapphire wafers   K.Saw
• [mems-talk] wet etch recipe for Iridium (Ir)   Mantavya Sinha
• [mems-talk] Re: Q. 2: Adhesion Mechanism between HMDS and PMMA   Michael Larsson
• [mems-talk] Suss Microtech Mask Aligner lamp probloem   Sudesh Bhagwat
• [mems-talk] DLC-layers with defined surface resistivity   Svyatoslav Alimov
• [mems-talk] silver etching   Rupesh Sawant
• [mems-talk] LPCVD SiN mask cost of ownership model   Mac Daily
  • [mems-talk] LPCVD SiN mask cost of ownership model   Roger Shile
• [mems-talk] Vapor deposition of Polyimide   Phillipe Tabada
• [mems-talk] sputtering/Ebeam   Andrew Xiang
  • [mems-talk] AFm engaging problem   Hongjun-ECE
• [mems-talk] Re: AFm engaging problem   Joseph Zhu
• [mems-talk] SiC carrier concentration vs. resistivity   Miyakawa, Natsuki
• [mems-talk] Small etcher for polymers like parylene & polyimide   Jun Chae
• [mems-talk] Help: small feature needs to be done by injection molding   Jeff chen
• [mems-talk] High aspect SU-8 molding   Peng Li (Paul)
  • [mems-talk] High aspect SU-8 molding   davidfozdar at mail.utexas.edu
• [mems-talk] PDMS to PDMS bonding   Peng Li (Paul)
• [mems-talk] PDMS to PDMS bonding   abdou sar
• [mems-talk] Shipley S1818 shrink/melt during hard bake   junyu at berkeley.edu
  • [mems-talk] Shipley S1818 shrink/melt during hard bake   davidfozdar at mail.utexas.edu
• [mems-talk] PVDF supplier   RSD
• [mems-talk] Resist Coating Large Scale Conformal/Ogave surfaces   David Casale
  • [mems-talk] Resist Coating Large Scale Conformal/Ogave surfaces   Bill Moffat
• [mems-talk] Resist Coating Large Scale Conformal/Ogave surfaces   Cain, Mike
• [mems-talk] Resist Coating Large Scale Conformal/Ogave surfaces   Rick Williston
• [mems-talk] temperature dependent yield stress of gold and silver   erkin seker
• [mems-talk] wet etch recipe for Iridium (Ir)   Mantavya Sinha
  • [mems-talk] wet etch recipe for Iridium (Ir)   David Nemeth
• [mems-talk] Vertical Cavity (Surface) Emitting Laser elements   emelianov
• [mems-talk] Resist Coating Large Scale Conformal/Ogave surfaces   David Casale
• [mems-talk] Adhesion of evaporated Au on Pt layer   Rashed Mahameed
  • [mems-talk] Adhesion of evaporated Au on Pt layer   Brent Garber
  • [mems-talk] Adhesion of evaporated Au on Pt layer   Kirt Williams
  • [mems-talk] Adhesion of evaporated Au on Pt layer   WANG,TAK
• [mems-talk] Problem with PDMS removal from the SU-8 mold   Vishwa
  • [mems-talk] Problem with PDMS removal from the SU-8 mold   Gareth Jenkins
• [mems-talk] silver electroplating   g.balsubra manian
• [mems-talk] Problem with PDMS removal from the SU-8 mold   Beggans Michael H IHMD
• [mems-talk] Problem with PDMS removal from the SU-8 mold   Vishwa
• [mems-talk] Problem with PDMS removal from the SU-8 mold   Vishwa
  • [mems-talk] Problem with PDMS removal from the SU-8 mold   Joseph Grogan
  • [mems-talk] Problem with PDMS removal from the SU-8 mold   Jacques Jonsmann
• [mems-talk] Problem with PDMS removal from the SU-8 mold   Vishwa
  • [mems-talk] SU-8 crack   Lujun Zhang
    • [mems-talk] SU-8 crack   Peng Li (Paul)
  • [mems-talk] Problem with PDMS removal from the SU-8 mold   Peng Li (Paul)
• [mems-talk] Prob with PDMS removal MEMS-talk Digest, Vol 52, Issue 20   huy vo
• [mems-talk] Problem with PDMS removal from the SU-8 mold   Gareth
• [mems-talk] wafer fixing when dicing   Andrea Mazzolari
  • AW: [mems-talk] wafer fixing when dicing   Marc Häfner
  • [mems-talk] wafer fixing when dicing   ZICKAR Michaël
• [mems-talk] pmma lithography   Chen Han Lee
  • [mems-talk] pmma lithography   davidfozdar at mail.utexas.edu
    • [mems-talk] pmma lithography   Jim Beall
      • [mems-talk] siloxane dielectric layer-by-layer coating   Ren Yang
• [mems-talk] Gold on SU-8   Yue Mun Pun, Jeffrey
  • [mems-talk] Gold on SU-8   Kevin Paul Nichols
  • [mems-talk] Wet etch chemistry for evaporated titanium   Yue Mun Pun, Jeffrey
    • [mems-talk] Wet etch chemistry for evaporated titanium   Brent Garber
• [mems-talk] lihography problem   abhaya joshi
  • [mems-talk] lihography problem   P.E.M. Kuijpers
• [mems-talk] Low Stress Si3N4 in LPCVD   王孝忠
  • [mems-talk] Low Stress Si3N4 in LPCVD   Hongjun-ECE
• [mems-talk] Contact angle of thermally grown silicon oxide and native silicon oxide   Pradeep Dixit
• [mems-talk] pmma lithography   Chris Park
• [mems-talk] AZ P4620 photoresist reflow   Crystalmems
• [mems-talk] Re: Wafer Fixing when Dicing   zer0energy-mems at yahoo.com
• [mems-talk] Problem with PDMS removal from the SU-8 mold   Vishwa
• [mems-talk] Removal of post-lift-off resist residue   Yue Mun Pun, Jeffrey
  • [mems-talk] Removal of post-lift-off resist residue   Pradeep Dixit
    • [mems-talk] Removal of post-lift-off resist residue   Yue Mun Pun, Jeffrey
• [mems-talk] Problem with PDMS removal from the SU-8 mold   Barbara Cortese
• [mems-talk] Wax for mounting   likeji
• [mems-talk] Problem with PDMS removal from the SU-8 mold   Vishwa
• [mems-talk] Wet etch chemistry for evaporated titanium   Barbara Cortese
• [mems-talk] Problem with PDMS removal from the SU-8 mold   Barbara Cortese
• [mems-talk] Problem with RTA process   Mantavya Sinha
• [mems-talk] looking forsuppliers SnAg electroplating bath   Cui Feng
• [mems-talk] I have a problem with su8 2100   saravan kallempudi
  • [mems-talk] I have a problem with su8 2100   Gareth Jenkins
    • [mems-talk] I have a problem with su8 2100   g.balsubra manian
• [mems-talk] Piezoelectric polymer deposition   RSD

Last message date: Wed Feb 28 17:11:00 EDT 2007
Archived on: Wed Feb 28 18:12:21 EDT 2007

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...