January 2007 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Jan 2 03:03:50 EDT 2007
Ending: Wed Jan 31 17:38:44 EDT 2007
Messages: 107

• [mems-talk] Deep SU-8   Peng Li (Paul)
• [mems-talk] How to clean PDMS or PLGA thin film on the Si chip   欢黄
• [mems-talk] Re: Releasing of the nitride suspended structure   虞益挺
• [mems-talk] About initial stress in ANSYS (Yiting Yu)   虞益挺
• [mems-talk] Integrated Inductors   Adamson, Steve
• [mems-talk] intergrated Inductor   Adamson, Steve
• [mems-talk] Phd studies in Micro/Nanofluidics   Mohammed Asfer
• [mems-talk] Re: Why oxidation rate of polysilicon is much higherthan that of single-crystal silicon(100)   Cain, Mike
• [mems-talk] SU-8 and S1813   Brubaker Chad
• [mems-talk] SIMOX (Separation by Implantation Of Oxygen) of Germanium   Long Chen
• [mems-talk] Why oxidation rate of polysilicon is much higher than that of single-crystal silicon(100)   wanhong Cheung
• [mems-talk] low index SiO2 or other material   Matthew Coda
• [mems-talk] How to clean PDMS or PLGA thin film on the Si chip   Barbara Cortese
• [mems-talk] BHF solution   Barbara Cortese
• [mems-talk] BHF solution   Barbara Cortese
• [mems-talk] Wet etch for Titanium   Barbara Cortese
• [mems-talk] purge with N2   Qiao Dayong
• [mems-talk] About the Al pad etchant   Qiao Dayong
• [mems-talk] SiO2 lpcvd deposition   Qiao Dayong
• R: [mems-talk] SiO2 lpcvd deposition   Qiao Dayong
• [mems-talk] Microautomation 1100 support needed   Marco Doms
• [mems-talk] CAD tool for MEMS   Dr Nicolas Felix
• [mems-talk] best etching for PZT   Dr Nicolas Felix
• [mems-talk] Re: Why oxidation rate of polysilicon is much higher than that of single-crystal silicon(100)   PRAMOD GUPTA
• [mems-talk] SU-8 and S1813   Joseph Grogan
• [mems-talk] Lift-off Recipe   Joseph Grogan
• [mems-talk] HF resistant coating   Hakemi, Ghazal
• [mems-talk] transfer bonding   Hakemi, Ghazal
• [mems-talk] best etching for PZT   Hakemi, Ghazal
• [mems-talk] Providers   Hakemi, Ghazal
• [mems-talk] ITO VS TiO2   Hakemi, Ghazal
• [mems-talk] ITO and TiO2 deposition   Hakemi, Ghazal
• [mems-talk] How to remove PR in the sample with CNT   Thomas Helbling
• [mems-talk] SU-8 and S1813   Homan, Tony J
• [mems-talk] Integrated Inductors   Homan, Tony J
• [mems-talk] ordered porous structure   Lung-hao Hu
• [mems-talk] SU8 peeling off   Abhishek Jain
• [mems-talk] Phd studies in Micro/Nanofluidics   Abhishek Jain
• [mems-talk] Deep SU-8   Gareth Jenkins
• [mems-talk] BHF solution   Gareth Jenkins
• [mems-talk] SU8 peeling off   Gareth Jenkins
• [mems-talk] Hi,who can provide the MEMS mirror chip,thanks!   JianpingWang at o-netcom.com
• [mems-talk] Need the MEMS mirror:tilt +/- 5 degrees with one-axis   JianpingWang at o-netcom.com
• [mems-talk] Adhesion BPR100 resist on AuZn   P.E.M. Kuijpers
• [mems-talk] Re: Why oxidation rate of polysilicon is much higher than that of single-crystal silicon(100)   Michael Larsson
• [mems-talk] purge with N2   Michael D Martin
• [mems-talk] nitride etch   Michael D Martin
• [mems-talk] Annealing of Ti-Ag-thin films on Si   Michael D Martin
• [mems-talk] Low Quantity SI Water Supplier   Hans Mayer
• [mems-talk] Aces silicon etch download   Andrea Mazzolari
• [mems-talk] SiO2 lpcvd deposition   Andrea Mazzolari
• R: [mems-talk] SiO2 lpcvd deposition   Andrea Mazzolari
• [mems-talk] How to decrease TTV ?   Andrea Mazzolari
• [mems-talk] low index SiO2 or other material   Scott McWilliams
• [mems-talk] PMMA   Ranjini Menon
• [mems-talk] Annealing of Ti-Ag-thin films on Si   Miyakawa, Natsuki
• [mems-talk] Adhesion BPR100 resist on AuZn   Bill Moffat
• [mems-talk] Lift-off Recipe   Bill Moffat
• [mems-talk] wet etch recipe for Iridium (Ir)   David Nemeth
• [mems-talk] Cyclohexane sublimation   Ernesto Di Paola
• [mems-talk] nitride etch   Dadhichi Paretkar
• [mems-talk] Any good selective etch process to etch P-type Si and stops at intrinsic Si?   Chris Park
• [mems-talk] Ni and Ti vendor for Thermal evaporator   Hyunsoo Park
• [mems-talk] structure release   Suraj Patil
• [mems-talk] Force and Acceleration Sensors   Rana, Mukti M
• [mems-talk] Piezoresistive Accelerometer   Rana, Mukti M
• [mems-talk] silver electroplating   Rupesh Sawant
• [mems-talk] Looking for a Comb-Drive Microactuator for pushing   Mohsen Shahini
• [mems-talk] Lift-off Recipe   Ravi Shankar
• [mems-talk] About initial stress in ANSYS   Daniel Shaw
• [mems-talk] About initial stress in ANSYS (Yiting Yu)   Daniel Shaw
• [mems-talk] Integrated Inductors   Roger Shile
• [mems-talk] wet etch recipe for Iridium (Ir)   Mantavya Sinha
• [mems-talk] wet etch recipe for Iridium (Ir)   Mantavya <Manu> Sinha
• [mems-talk] Sensing film for moisture   Dedy H.B. Wicaksono
• [mems-talk] BHF solution   Kirt Williams
• [mems-talk] Sensing film for moisture   Yogendra Yadav_04322601
• [mems-talk] CAD tool for MEMS   Yogendra Yadav_04322601
• [mems-talk] Looking for providers of cantilevers, membranes and   Yogendra Yadav_04322601
• [mems-talk] Sacrificial polyimide with low CTE   Jill Yang
• [mems-talk] Minimum thickness of Chromium and Gold for blocking UV   Ren Yang
• [mems-talk] How to remove PR in the sample with CNT   Lin Yu
• [mems-talk] Shear strength of gold on SU-8   Yue Mun Pun, Jeffrey
• [mems-talk] Minimum thickness of Chromium and Gold for blocking UV   Yue Mun Pun, Jeffrey
• [mems-talk] Lift-off Recipe   Yue Mun Pun, Jeffrey
• [mems-talk] Lift-off Recipe   Yue Mun Pun, Jeffrey
• [mems-talk] Wet etch for Titanium   Yue Mun Pun, Jeffrey
• [mems-talk] looking for polycarbonate and solvent   Y-bean Zhang
• [mems-talk] purge with N2   abdelyamine
• [mems-talk] Releasing of the nitride suspended structure   deepak agrawal
• [mems-talk] Releasing of the nitride suspended structure   deepak agrawal
• [mems-talk] nitride etch   bobhendu at aol.com
• [mems-talk] PMMA   paolo bondavalli
• [mems-talk] testing under gas flow   paolo bondavalli
• [mems-talk] PMMA   Jeff chen
• [mems-talk] Re: MEMS-talk piezoresistive accelerometer   srihari hs
• [mems-talk] structure release   abhaya joshi
• [mems-talk] About initial stress in ANSYS   li ling
• [mems-talk] About setting conductance between each node in ansys   li ling
• [mems-talk] PECVD SiN at temperature 250℃   memser
• [mems-talk] Lift-off Recipe   sachin narwade
• [mems-talk] Releasing of the nitride suspended structure   erkin seker
• [mems-talk] Photolithography, baking temperature   jpt sharma
• [mems-talk] Give me a vendor for Polycarbonate   stefano.park at gmail.com
• [mems-talk] intergrated Inductor   huy vo
• [mems-talk] ordered porous structure(MCM-41, porous silicon or nanowire)   yun wang
• [mems-talk] Releasing of the nitride suspended structure   yun wang

Last message date: Wed Jan 31 17:38:44 EDT 2007
Archived on: Wed Jan 31 19:56:58 EDT 2007

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...