July 2007 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Jul 2 10:12:31 EDT 2007
Ending: Tue Jul 31 20:17:21 EDT 2007
Messages: 114

• [mems-talk] articles/case studies Sn Al Cu   Morten Aarøe
• [mems-talk] Etch simulation software   Sven Holmström
• [mems-talk] articles/case studies Sn Al Cu   A.E.Reinhardt
• [mems-talk] UBM   A.E.Reinhardt
• [mems-talk] Affordable Plasma Cleaner that is non- RF emissionscompliant   Adamson, Steve
• [mems-talk] anodic bonding and passivation layer thickness   Anil Agiral
• [mems-talk] literature or book on glass   Rajib Ahmed
• [mems-talk] redeposition of SiO2   cal Bear
• [mems-talk] Resist residue removal   cal Bear
• [mems-talk] Resin which resists to DMF   Paolo Bondavalli
• [mems-talk] Biocompatible Spray Adhesive   Andrew Browne
• [mems-talk] lift off with PMMA   Hongzhi CHEN
• [mems-talk] lift off with PMMA   Hongzhi CHEN
• [mems-talk] Question about bonding Au to Aluminum metal film   Chen,Yuansen
• [mems-talk] Microfluidics ports   Ciro Chiappini
• [mems-talk] Re: Microfluidics ports   Ciro Chiappini
• [mems-talk] ebeam evaporated metal's properties   Matthew Coda
• [mems-talk] Dry Film Resist patterning   Gavin Copeland
• [mems-talk] chain length PDMS   Barbara Cortese
• [mems-talk] 2" SOI wafer supplier   John Dangtran
• [mems-talk] RE: Microfluidics ports   Dave
• [mems-talk] stress in polisilicon fixed-fixed beams   Qiao Dayong
• FW: [mems-talk] Surface Charge problems in PMMA - Ebeam lithography !!   Mathieu Foquet
• [mems-talk] Platinum deposition problem   Jesse D Fowler
• [mems-talk] lift off with PMMA   Jesse D Fowler
• [mems-talk] Developer for Polyurethane Oligomer Mixture   Kelly Goss
• [mems-talk] Polystyrene bonding problem   Joseph Grogan
• [mems-talk] Re: ebeam evaporated metal's properties (Josh)   N H
• [mems-talk] Re: polimer fabrication   N H
• [mems-talk] chain length PDMS   N H
• [mems-talk] Microfluidics ports   N H
• [mems-talk] Re: Plasma Bounding Sources   N H
• [mems-talk] Carver press   Hakemi, Ghazal
• [mems-talk] Silicone spin coating of steel membranes   Markus Herz
• [mems-talk] WG: Silicone spin coating of steel membranes   Markus Herz
• [mems-talk] Re: chain length PDMS   Philip D. Hewes
• [mems-talk] Mask design problem! (Steven Yang)   Indusekhar
• [mems-talk] Surface Charge problems in PMMA - Ebeam lithography !!   Indusekhar
• [mems-talk] Any suggestions on through holes on Glass pyrex 7740 wafer   JBishop596 at aol.com
• [mems-talk] Microfluidics ports   Gareth Jenkins
• [mems-talk] Mounting shadow masks   Prasoon Joshi
• [mems-talk] Microfluidics ports   K.P.Nichols at utwente.nl
• [mems-talk] anodic bonding and passivation layer thickness   Shay Kaplan
• [mems-talk] Wetting Agent for Tungsten   Richard B. Keithley
• [mems-talk] lift off with PMMA   Josef Kouba
• [mems-talk] micro/macro Porous silicon formation   LSujatha
• [mems-talk] Nickel and Nickel-Chrome etching   Laurent Laurent
• [mems-talk] NiFe or NiCo electroplating   Ebin Liao
• [mems-talk] anodic bonding and passivation layer thickness   H.J. van der Linden
• [mems-talk] Platinum deposition problem   Michael D Martin
• [mems-talk] SiO2 cracking problem   Michael D Martin
• [mems-talk] Re: A question related with the aqua regia etching Pt and the mask   Michael D Martin
• [mems-talk] Re: Microfluidics ports   Michael D Martin
• [mems-talk] Affordable Plasma Cleaner that is non- RF emissio nscompliant   Ron Martin
• [mems-talk] (211) silicon etch rate   Andrea Mazzolari
• [mems-talk] GaAl on germanium   Andrea Mazzolari
• [mems-talk] Etch simulation software   Andrea Mazzolari
• [mems-talk] spin etch equipment   Andrea Mazzolari
• AW: [mems-talk] micro/macro Porous silicon formation   Miyakawa, Natsuki
• [mems-talk] WG: Silicone spin coating of steel membranes   Bill Moffat
• [mems-talk] pure adhesion between SU8 and Cu   Bill Moffat
• [mems-talk] Plasma Bonding sources   Bill Moffat
• [mems-talk] Affordable Plasma Cleaner that is non- RF emissionscompliant   David Nemeth
• [mems-talk] Mask design problem!   Kevin Paul Nichols
• [mems-talk] Packaging for MEMS device with Backside Connection   Andrew O'Grady
• [mems-talk] Platinum deposition problem   sokwon Paik
• [mems-talk] Platinum deposition problem   sokwon Paik
• [mems-talk] pure adhesion between SU8 and Cu   Zhang Xiao Qiang
• [mems-talk] lift off with PMMA   Rashid, Mamun
• [mems-talk] polymer fabrication   Rashid, Mamun
• [mems-talk] Polystyrene bonding problem   Rashid, Mamun
• [mems-talk] Polystyrene bonding problem   Rashid, Mamun
• [mems-talk] NiFe or NiCo electroplating   David Roberts
• [mems-talk] Re : About Aluminum protection in TMAH   Ravi Shankar
• [mems-talk] Adding contact to structural-electrostatic solverESSOLV in ANSYS   Daniel Shaw
• [mems-talk] anodic bonding and passivation layer thickness   Roger Shile
• [mems-talk] Etchant(s) for SL structure!   Nitin Shukla
• [mems-talk] anodic bonding and passivation layer thickness   Peter Svasek
• [mems-talk] Glass etch   Kagan Topalli
• [mems-talk] PI remover for bowl wash   Kagan Topalli
• [mems-talk] Piranha Etching of Silicon Carbide   Sreemanth M Uppuluri
• [mems-talk] Plasma Bonding sources   Vishwa
• [mems-talk] Platinum deposition problem   Jian Wang
• [mems-talk] Make SU8 with Mylar Mask   Jian Wang
• [mems-talk] PDMS to PMMA/polycarbonate bonding   Jing Wang
• [mems-talk] Mounting shadow masks   Kirt Williams
• [mems-talk] plasma etching of SiO2 and its selectivity over resists   Kirt Williams
• [mems-talk] Microfluidics ports   Kirt Williams
• [mems-talk] How to grind or polish sapphire substrate?   jiaxing Yang
• [mems-talk] Mask design problem!   Steven Yang
• [mems-talk] Any suggestions on through holes on Glass pyrex 7740 wafer   Steven Yang
• [mems-talk] Etching of glass   Yue Mun Pun, Jeffrey
• [mems-talk] Etch Glass/Quartz substrate   Haixin Zhu
• [mems-talk] Glass/Quartz Substrate supplier   Haixin Zhu
• [mems-talk] pen-shape glass substrate cutter   Haixin Zhu
• [mems-talk] Reg. Vertical Side Walls for microdisk lasers   ahajjiah at vt.edu
• [mems-talk] help   anu67 at sancharnet.in
• [mems-talk] plasma etching of SiO2 and its selectivity over resists   prabhu arumugam
• [mems-talk] hybrid integration   rakesh babu
• [mems-talk] How to get a sheet of Cr film via E-beam evap.   hung bost
• AW: [mems-talk] polymer fabrication   emelianov
• [mems-talk] Functional surface chemistry and coating technologies   emelianov
• [mems-talk] SiO2 cracking problem   henson at bu.edu
• [mems-talk] About Si etching in TMAH   abhaya joshi
• [mems-talk] About AL protection in TMAH.   abhaya joshi
• [mems-talk] Mounting shadow masks   shay kaplan
• [mems-talk] polymer fabrication   hammouche khales
• [mems-talk] the relation betweeen aspect ratio and height in Bosch process   matthew king
• [mems-talk] Glass etch   kris
• [mems-talk] Surface Charge problems in PMMA - Ebeam lithography !!   madhav rao
• [mems-talk] Questions concerning Polyimide PI2600 series from HD Microsystems   rdavi021 at uottawa.ca
• [mems-talk] Etchant(s) for SL structure!   Jaibir sharma
• [mems-talk] AZ 5214 PR for metal lift off   jpt sharma
• [mems-talk] stress in polisilicon fixed-fixed beams   bhat soma

Last message date: Tue Jul 31 20:17:21 EDT 2007
Archived on: Tue Jul 31 21:06:37 EDT 2007

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...