June 2007 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Jun 1 05:00:03 EDT 2007
Ending: Sat Jun 30 19:31:51 EDT 2007
Messages: 128

• [mems-talk] Absorbance measurement of multi-layer structures   D. Zhou
  • [mems-talk] Absorbance measurement of multi-layer structures   Rana, Mukti M
    • [mems-talk] Absorbance measurement of multi-layer structures   Raj Gupta
• [mems-talk] Gold deposition on uncrosslinked SU-8   Maria Nordström
• [mems-talk] RE: amount of swelling   Harald Walter
• [mems-talk] MEMS Biosensor   aniruddh at iitg.ernet.in
• [mems-talk] Re: Hillrocks Generated during TMAH Etching   kris
• [mems-talk] linearization of voltage-angle relationship in a torsional micromirror   matthew king
  • [mems-talk] linearization of voltage-angle relationship in atorsional micromirror   Robert Black
  • [mems-talk] linearization of voltage-angle relationship in a torsional micromirror   Raj Gupta
• [mems-talk] RIE Etch   Tolga YELBOGA
• [mems-talk] KOH Process question   Benedikt Zeyen
• [mems-talk] Re: Hillrocks Generated during TMAH Etching   李科佳
  • [mems-talk] Re: Hillrocks Generated during TMAH Etching   kris
• [mems-talk] Bench top spray developer unit   P.E.M. Kuijpers
• [mems-talk] Would dippint into Piranha be helpful for Au-Au thermocompression wafer bonding?   胡小东
• [mems-talk] Chemical Mechanical Polishing of Germanium   Long Chen
• [mems-talk] High temperature wax with melting point ~100'C and PCR compatible   Yue Mun Pun, Jeffrey
  • [mems-talk] High temperature wax with melting point ~100'C and PCRcompatible   Jason Milne
• [mems-talk] 2.5 um microchannels in SU-8   Herman Walgraeve - TNW
  • [mems-talk] 2.5 um microchannels in SU-8   shay kaplan
    • [mems-talk] 2.5 um microchannels in SU-8   Herman Walgraeve - TNW
• [mems-talk] RE: 2.5 um microchannels in SU-8 (shay kaplan)   Dave
  • [mems-talk] RE: 2.5 um microchannels in SU-8 (shay kaplan)   Herman Walgraeve - TNW
• [mems-talk] RE: 2.5 um microchannels in SU-8 (shay kaplan)   JBishop596 at aol.com
  • [mems-talk] RE: 2.5 um microchannels in SU-8 (shay kaplan)   Herman Walgraeve - TNW
• [mems-talk] poly etch back for trench   ameng
• [mems-talk] About Cr mask dry eching   li ling
• [mems-talk] etch back spike   ameng
• [mems-talk] Wafer size reduction   Vijay
  • [mems-talk] Wafer size reduction   Nicolas Duarte
• [mems-talk] E beam lithography-Alignment procedures !!   madhav rao
• [mems-talk] Selective RIE etching of silicon over silicon oxide   Ning Wu (nwu at Princeton.EDU)
  • [mems-talk] Selective RIE etching of silicon over silicon oxide   ameng
  • [mems-talk] Selective RIE etching of silicon over silicon oxide   Starzynski, John
• [mems-talk] Polystyrene and Polylactic acid   Yue Mun Pun, Jeffrey
• [mems-talk] lithography using su8 and mask   Sabri Mahdaoui
• [mems-talk] Re: Wafer size reduction   Christopher Striemer
• [mems-talk] Selective dry etching of ITO   nwu
• [mems-talk] remove SU8 dry etching   Zhang Xiao Qiang
  • [mems-talk] remove SU8 dry etching   bobhendu at aol.com
• [mems-talk] ITO as the conductive layer of NiP plating?   Zhang Xiao Qiang
• [mems-talk] Drie support wafer   ashwini jambhalikar
  • [mems-talk] Drie support wafer   bobhendu at aol.com
  • [mems-talk] Drie support wafer   Jim Beall
    • [mems-talk] SOI wafers   Andrea Mazzolari
    • [mems-talk] Drie support wafer   Xiaoguang Liu
      • [mems-talk] Drie support wafer   Jim Beall
      • [mems-talk] Drie support wafer   Xiaoguang Liu
  • [mems-talk] Drie support wafer   Xiaoguang Liu
    • [mems-talk] (211) silicon wafers   Andrea Mazzolari
• [mems-talk] Ceramic wafers   Peng Li
• [mems-talk] the relation between resolution and angular random walk   matthew king
  • [mems-talk] the relation between resolution and angular random walk   Shay Kaplan
    • [mems-talk] the relation between resolution and angular random walk   matthew king
• [mems-talk] Au-Au bonding   Xiaoguang Liu
• [mems-talk] Question on PDMS micro channels   King Lai
  • [mems-talk] Question on PDMS micro channels   Gwennou Coupier
  • [mems-talk] Question on PDMS micro channels   Petru Lunca Popa
  • [mems-talk] Question on PDMS micro channels   Chris Bliss
    • [mems-talk] Question on PDMS micro channels   Joseph Grogan
• [mems-talk] Au-Au bonding   Mendis, Heyshan
  • [mems-talk] Au-Au bonding   Xiaoguang Liu
    • [mems-talk] Au-Au bonding   Mendis, Heyshan
• [mems-talk] Pull-in problem while Anodic Bonding   이상민
• [mems-talk] Re: Question on PDMS micro channels   Bhamidipati srikalyan
• [mems-talk] Reflectivity with SU-8 on Au on Sapphire   Dan Stark
• [mems-talk] Increasing PDMS bonding to glass without using oxygen plasma   Virginia Abranches de Sousa R. Soares
  • [mems-talk] Increasing PDMS bonding to glass without using oxygen plasma   Kevin Christ
• [mems-talk] About Bonding   Hanfei Wang
• [mems-talk] Smooth Side Wall Profile usin AZ-5209   Rama Kotha
  • [mems-talk] Smooth Side Wall Profile usin AZ-5209   Tolga YELBOGA
• [mems-talk] Solubility of paraffin wax in organic solvents   Yue Mun Pun, Jeffrey
• [mems-talk] Re: Selective RIE etching of silicon over silicon oxide   abhaya joshi
• [mems-talk] Re: Question on PDMS micro channels   Ciro Chiappini
• [mems-talk] Re: Selective RIE etching of silicon over silicon oxide   Eric Sanjuan
• [mems-talk] Wafer-level bonding using SU-8   Chih-Chieh Cheng
• [mems-talk] spring constant of complex cantilever beams   bhat soma
• [mems-talk] Divots seen in SU-8 2050 film   Yue Mun Pun, Jeffrey
• [mems-talk] Material shrinkage on hydrophobic surface   Laurent Laurent
• [mems-talk] PDMS Sealing over Au?!   N H
  • [mems-talk] PDMS Sealing over Au?!   shay kaplan
• [mems-talk] RE:spring constant of complex cantilever beams   kris
• [mems-talk] About mems Tele Detection   nabi nabiollahi
• [mems-talk] Electroless Ag on Ni   Avi Laker
• [mems-talk] PDMS Sealing over Au?!   N H
  • [mems-talk] PDMS Sealing over Au?!   Joseph Grogan
• [mems-talk] RE: PDMS Sealing over Au?!   Philip D. Hewes
• [mems-talk] PDMS Sealing over Au?!   N H
• [mems-talk] Re: PDMS Sealing over Au?!   N H
• [mems-talk] Plexiglas® G PMMA sheet supplier   Shao Guocheng
• [mems-talk] How to remove polymer on the sidewall after DRIE?   G Gan
  • [mems-talk] How to remove polymer on the sidewall after DRIE?   swtepla at attglobal.net
    • [mems-talk] How to remove polymer on the sidewall after DRIE?   G Gan
• [mems-talk] Inquiry regarding sidewall deposition of wafers in e-beam metalization   polly
  • [mems-talk] Inquiry regarding sidewall deposition of wafers in e-beam metalization   shay kaplan
    • [mems-talk] Inquiry regarding sidewall deposition of wafersin e-beam metalization   Bill Moffat
• [mems-talk] How to remove polymer on the sidewall after DRIE?   Stéphane H
• [mems-talk] Isotropic silicon etch   Chilcott, Dan W
  • [mems-talk] Isotropic silicon etch   Kirt Williams
  • [mems-talk] Isotropic silicon etch   David Nemeth
    • [mems-talk] Isotropic silicon etch   Chilcott, Dan W
  • [mems-talk] Low temperture anodic bonding between glass and silicon   Robert Lindegren
  • [mems-talk] Isotropic silicon etch   b.liu at duke.edu
  • [mems-talk] Isotropic silicon etch   Shao Guocheng
• [mems-talk] Bosche Process explained?   Holmes, Kathleen
  • [mems-talk] Bosche Process explained?   John Caulfield
  • [mems-talk] Bosche Process explained?   Jim Beall
  • AW: [mems-talk] Bosche Process explained?   Michael Prömpers
• [mems-talk] Patterning gold on PDMS   Yue Mun Pun, Jeffrey
• [mems-talk] PDMS on PMMA   Paolo Bondavalli
• [mems-talk] 2" SOI wafer supplier   Morten Aarøe
• [mems-talk] Re: Mask for ICP (dry etching)   Arti Tibrewala
  • [mems-talk] Re: Mask for ICP (dry etching)   Isaac Chan
    • [mems-talk] Re: Mask for ICP (dry etching)   Bill Moffat
      • [mems-talk] Re: Mask for ICP (dry etching)   Le Cao Hoai Nam
  • [mems-talk] Re: Mask for ICP (dry etching)   Mihaela Carp
• [mems-talk] UV-lithography on high aspect rate patterned surface   emelianov
• [mems-talk] Low temperature anodic bonding between glass and silicon   Robert Lindegren
• [mems-talk] Glass-membrane-glass bonding   Yao Zhou
• [mems-talk] Re:PDMS on PMMA   N H
• [mems-talk] Re: Mask for ICP (dry etching)   N H
• [mems-talk] (no subject)   mems-talk at memsnet.org
• [mems-talk] adding contact to the electrostatic-structural problem   Mohammad Shavezipur
  • [mems-talk] adding contact to the electrostatic-structural problem   K.P.Nichols at utwente.nl
• [mems-talk] Adding contact to structural-electrostatic solver ESSOLV in ANSYS   Mohammad Shavezipur
• [mems-talk] Affordable Plasma Cleaner that is non- RF emissions compliant   Ron Martin
• [mems-talk] ebeam evaporated metal's properties   Josh

Last message date: Sat Jun 30 19:31:51 EDT 2007
Archived on: Sat Jun 30 19:57:51 EDT 2007

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...