March 2007 Archives by thread
Starting: Thu Mar 1 01:17:47 EDT 2007
Ending: Sat Mar 31 21:43:38 EDT 2007
Messages: 214
- [mems-talk] Wet etching Gold
Yue Mun Pun, Jeffrey
- [mems-talk] Depositing metals onto plastics and SU-8
Jon Fox
- [mems-talk] Piranha etch
Matteo Dainese
- [mems-talk] Re: Wet etching Gold
Gabriel Matus
- [mems-talk] Bismuth etching
Zhiwei Zou
- [mems-talk] The pre-preparation for surface hydrophobic
modification of silicon/glass
Steven Yang
- [mems-talk] Problems with evaporating Titanium
Yue Mun Pun, Jeffrey
- [mems-talk] Obtaining PDMS 100 micrometers films by evaporation
Petru Lunca Popa
- [mems-talk] Dip Coating resists and viscosity
David Casale
- [mems-talk] Depositing metals onto plastics and SU-8
garber at engr.uconn.edu
- [mems-talk] Bonding of crosslinked SU8
Robert O'Callahan
- [mems-talk] Problems with evaporating Titanium
Jon Fox
- [mems-talk] etch gold or lift-off?
Yitian Peng
- [mems-talk] etch gold or lift-off?
Nicolas Duarte
- [mems-talk] Depositing metals onto plastics and SU-8
garber at engr.uconn.edu
- [mems-talk] Rupturing an evaporated gold bridge on SU-8 posts
Yue Mun Pun, Jeffrey
- [mems-talk] Gold on SU-8
Yue Mun Pun, Jeffrey
- [mems-talk] Wet etching Gold
Yue Mun Pun, Jeffrey
- [mems-talk] Thermal issues in metal deposition
MT Klaus Beschorner
- R: [mems-talk] Low Stress Si3N4 in LPCVD
Andrea Mazzolari
- [mems-talk] Evaporating SiO2 on gold
Leyla Soleymani
- [mems-talk] Glass Thermal Bonding
Rupesh Sawant
- [mems-talk] RIE recipe for SiO2 etching with SF6.
ANIRBAN CHAKRABORTY
- [mems-talk] Recipe and procedure to etch Ti and Gold
yitianp at email.arizona.edu
- [mems-talk] Complex Permittivity of Silicon Dioxide
Oguz Elibol
- [mems-talk] Insulator on gold characterization
Leyla Soleymani
- [mems-talk] Does H2O2 attack AZ5214E? Does HCL:HNO3 attack
uncrosslinked SU-8
Yue Mun Pun, Jeffrey
- [mems-talk] Microwave frequency & quartz glass with airflow and
chloride of alkali-K, Na
wahid YEMI.
- [mems-talk] Polymer depostion on silicon
RSD
- [mems-talk] Methods to make thick resist layer
yul.fany at gmail.com
- [mems-talk] Wet Etching SiO2 using PMMA
Leyla Soleymani
- [mems-talk] Etching SiO2 and not sapphire!
Nitin Shukla
- [mems-talk] etch velocity and etchant?
yitianp at email.arizona.edu
- [mems-talk] Meaurement of noise characteristics of microbolometers
D. Zhou
- [mems-talk] Selective etching of Chromium and Gold
Yue Mun Pun, Jeffrey
- [mems-talk] Evaporating Chromium or Titanium on uncrosslinked SU-8
Yue Mun Pun, Jeffrey
- [mems-talk] Information regarding Polyimide
sheeja mathew
- [mems-talk] Birefringence measurements of polymers
Anna Ohlander
- [mems-talk] lift-off
yitianp at email.arizona.edu
- [mems-talk] Reason for cracks due to high stress in pecvd oxide
after annealing
udaybhaskar katreddi
- [mems-talk] Plating Au to a Ni seed layer
P.E.M. Kuijpers
- [mems-talk] Re: Reason for cracks in PECVD silica post-annealing
Michael Larsson
- [mems-talk] Does anybody know how to open/input multiple files
simultaneously in Labview VI program?
jiaxing Yang
- [mems-talk] hi for help about the develop
yitianp at email.arizona.edu
- [mems-talk] Electroless deposition of gold on aluminum
Leyla Soleymani
- [mems-talk] E-beam evaporation with Silver
Siripon Sukuabol
- [mems-talk] E-beam evaporation of Gold on Titanium-coated or
Chromium-coated uncrosslinked SU-8
Yue Mun Pun, Jeffrey
- [mems-talk] hi for help about the develop
Avi Laker
- [mems-talk] Patterning gold on thermally evaporated Chromium by
lift-off using acetone
Yue Mun Pun, Jeffrey
- [mems-talk] Etching SiO2 but not sapphire!
Nitin Shukla
- [mems-talk] Boron Doped Diamond
JBishop596 at aol.com
- [mems-talk] Etching SiO2 but not sapphire!
Gary
- [mems-talk] looking for e-beam foundry service
Chris Park
- [mems-talk] AlGaAs microbeams cleaving??
vaibhav mathur
- [mems-talk] SU-8 on glass
Yue Mun Pun, Jeffrey
- [mems-talk] Using Chrome as etch mask
Leyla Soleymani
- [mems-talk] about si etching using TMAH
abhaya joshi
- [mems-talk] minimum Solder paste width!!
madhav rao
- [mems-talk] Bright Spots on PDMS during microPIV
Vishwa
- [mems-talk] Re: SU-8
yul.fany at gmail.com
- [mems-talk] hi,PMMA question?
yitianp at email.arizona.edu
- [mems-talk] Question about Microchem LOR B lift-off resist
Xiaoyuan Lou
- [mems-talk] Any method to do good etching on Al2O3?
Xiaoyuan Lou
- [mems-talk] SU-8 substrate gold wirebonding
John Ledgerwood
- [mems-talk] Bright Spots on PDMS during microPIV
Beggans Michael H IHMD
- [mems-talk] Pin holes in evaporated Chromium, Titanium and Gold
Yue Mun Pun, Jeffrey
- [mems-talk] Using Chrome as etch mask
Barbara Cortese
- [mems-talk] Sticking paterned PDMS on 100 um channels with some
precision?
Petru Lunca Popa
- [mems-talk] RE: minimum Solder paste width!!
Serhan ARDANUC
- [mems-talk] measure refractive index
Peng Li (Paul)
- [mems-talk] Pin holes in evaporated Chromium, Titanium and Gold
David Casale
- [mems-talk] wirebond on gold pads resting on SU-8
John Ledgerwood
- [mems-talk] Spinning SU-8 on Kapton Tape
Karthik Kumar
- [mems-talk] Dimples in SU-8 film
Yue Mun Pun, Jeffrey
- [mems-talk] polyimide
sheeja mathew
- [mems-talk] PDMS is sticking better on microscop slides or on Si
wafer?
Petru Lunca Popa
- [mems-talk] SU-8 wirebonding
John Ledgerwood
- [mems-talk] Bilayer liftoff with AZ7220 and LOR5A
Ji-Yong Park
- [mems-talk] RE: measure refractive index
Harald Walter
- [mems-talk] SiO2 lpcvd deposition
naitbouda
- [mems-talk] use of LAM 4500
naitbouda
- [mems-talk] about the striction of gold over BCB
saravan kallempudi
- [mems-talk] glass etching
Gao Xiaotong
- [mems-talk] Chromium film as a mask for Gold wet etch
Yue Mun Pun, Jeffrey
- [mems-talk] Patterning Gold heaters on glass
Yue Mun Pun, Jeffrey
- [mems-talk] Pinholes in Evaporated Gold film
Yue Mun Pun, Jeffrey
- [mems-talk] GaAs/AlGaAS vendor
Neelanjan Bhattacharya
- [mems-talk] Spin Coating PMMA on Si
pradeep # sharma
- [mems-talk] Regarding the MEMS Material Database.
Emmanuel thangiah
- [mems-talk] Multiple coatings of PMMA
Leyla Soleymani
- [mems-talk] Multiple coatings of PMMA
Virginia Abranches de Sousa R. Soares
- [mems-talk] bonding Polyimide to Polyimide using epoxy adhesive
Alter
- [mems-talk] Polyimide wet etching
Alter
- [mems-talk] Vertical SU-8 walls
Abhishek Jain
- [mems-talk] Some help required regarding dual doped TMAHW solution
Ravi Shankar
- [mems-talk] Spin coating PDMS on wafer
Peng Li (Paul)
- [mems-talk] Spin coating PDMS on wafer
Roger R. Shile
- [mems-talk] Using Chromium or Titanium thin film as a mask for Gold
wet etch
Yue Mun Pun, Jeffrey
- [mems-talk] PDMS is sticking better on SiO2 or on rezist ? or
directly on Glass sputtered with gold?
Petru Lunca Popa
- [mems-talk] T-Gate Lift off
Noemi Graziana SPARTA'
- [mems-talk] UV LED light source
Jim Beall
- [mems-talk] Spin coating PDMS on wafer
Lee, Hyung-Kew
- [mems-talk] silver paste
sheeja mathew
- [mems-talk] exact recepies for sticking PDMS on SIO2 and glass
please
Petru Lunca Popa
- [mems-talk] Au plating on Ni layer
P.E.M. Kuijpers
- [mems-talk] PDMS loss tangent at high frequency
Xiaoguang "Leo" Liu
- [mems-talk] small wafer piece container
Xiaochen Sun
- [mems-talk] Supplier of high resistivity (>1000 Ohm-cm) 150 mm
(110) silicon wafers
Starzynski, John
- [mems-talk] Solvent spin-on PDMS
Benedict Samuel
- [mems-talk] Dip Coating Soldering !!
madhav rao
- [mems-talk] low Stess SiNx deposited by PECVD
memser
- [mems-talk] Solvent spin-on PDMS
Barbara Cortese
- [mems-talk] Broadened SU-8 pattern
Peng Li (Paul)
- [mems-talk] Silicon carbide wet etch
robtdavis at charter.net
- [mems-talk] silicon dicing
Andrea Mazzolari
- [mems-talk] aging affect of al etch
galindo818 at aol.com
Last message date:
Sat Mar 31 21:43:38 EDT 2007
Archived on: Sun Apr 1 09:13:21 EDT 2007
This archive was generated by
Pipermail 0.09 (Mailman edition).