Dear Michael,
i am using a hot plate and ramp up gradually from 65C to 95C.The problem
though still persists:wrinkles forming as soon as the temperature starts
ramping from 65C to 95C...could it happen if there is still solvent residue
from the development phase of the first layer of 27 microns?what do you
think?i really appreciate your help in this matter.thank you.

Anthimos Kanteres
Microsystems Engineering Centre
Edinburgh,UK
a.kanteres@hw.ac.uk
________________________________________________________________

DISCLAIMER:

This e-mail and any files transmitted with it are confidential
and intended solely for the use of the individual or entity to
whom it is addressed.  If you are not the intended recipient
you are prohibited from using any of the information contained
in this e-mail.  In such a case, please destroy all copies in
your possession and notify the sender by reply e-mail.  Heriot
Watt University does not accept liability or responsibility
for changes made to this e-mail after it was sent, or for
viruses transmitted through this e-mail.  Opinions, comments,
conclusions and other information in this e-mail that do not
relate to the official business of Heriot Watt University are
not endorsed by it.
________________________________________________________________