Aslam,
    I have recently had the same problem. I have yet to fix the problem
but the next thing I intend to try is simply increasing the volume.

-I'll let you know
    Mike


>>> m_aslammalik@yahoo.com 03/21/02 06:58AM >>>
Dear friends

I am trying micromaching of silicon <100> wafer, 525
micron thick and 7 micron EPI layer (Ar) using TMAH
25%.  After 8 hours, the etching becomes so slow that
it hardly etch the wafer  to the oxide layer grown on
silicon wafer.  If I try etching from EPI layer,
polished side, initially it etches with its actual
etch rate,i.e. 1 micron/minute  but when wafer
thickness remains about 15-20 microns, the etching
becomes almost negligible.  Now If I start etching
from the unpolished side of wafer, the same problems
occures on the other side i.e. it stops etching the
remaining 15-20 micron silicon layer.  I can not
understand what is happening.  Is it solution weekness
or something ? i don't know.  Can somebody help me
please.


M. Aslam

m_aslammalik@yahoo.com
Yahoo! Movies - coverage of the 74th Academy Awards.
http://movies.yahoo.com/
_______________________________________________
mems-talk@memsnet.org mailing list: to unsubscribe or change your list
options, visit http://mail.mems-exchange.org/mailman/listinfo/mems-talk

Hosted by the MEMS Exchange, providers of MEMS processing services.
Visit us at http://www.mems-exchange.org/