Hi, Martin,
   Do you have any idea about the selective dry etch of Silver on GaAs?

Qingwei

-----Original Message-----
From: mems-talk-admin@memsnet.org [mailto:mems-talk-admin@memsnet.org]On
Behalf Of Martin.WALKER@oxinst.co.uk
Sent: Friday, April 19, 2002 3:43 AM
To: mems-talk@memsnet.org
Subject: [mems-talk] Re: selective dry etching of Al


Hi Arnaud

Unfortunately, your GaAs is likely to be etched significantly by anything
you can use to etch the Al layer.  Al will passivate effectively if you have
any fluorine present, so that should be avoided.  Your best hope is to try
wet etching with something like orthophosphoric acid.  This should remove
the Al at a reasonable rate.  As far as I know, it does not attack GaAs.

Regards, Martin

Martin Walker BSc(Tech) MSc
Tactical Marketing Engineer
Oxford Instruments Plasma Technology
North End, Yatton,
Bristol BS49 4AP  UK
T. +44 (0) 1934 837031
F. +44 (0) 1934 837001
E. 
W. 

 ###  OXFORD INSTRUMENTS   http://www.oxford-instruments.com/  ###

Unless stated above to be non-confidential, this E-mail and any
attachments are private and confidential and are for the addressee
only and may not be used, copied or disclosed save to the addressee.
If you have received this E-mail in error please notify us upon receipt
and delete it from your records. Internet communications are not secure
and Oxford Instruments is not responsible for their abuse by third
parties nor for any alteration or corruption in transmission.
_______________________________________________
mems-talk@memsnet.org mailing list: to unsubscribe or change your list
options, visit http://mail.mems-exchange.org/mailman/listinfo/mems-talk
Hosted by the MEMS Exchange, providers of MEMS processing services.
Visit us at http://www.mems-exchange.org/