I don't know about availability of a MUMPS design kit, but you can
certainly enter the layers your self. You should know that Coventor has
an error in the GDSII export utility in that you have to be sure to set
the max. number of points to >=4096. I am currently working on some mask
layouts using Coventor's Layout editor and at least one mask fab. has
had problems reading my GDSII file. This may just be my own inexperience
with mask design or maybe not. Please let us know what results you get.


-Mike Martin

>>> amirola@eel.upc.es 07/04/02 03:12AM >>>
Hi,
we recently purchased CoventorWare and we would like to submit some
MUMPS designs.
The problem is that, as far as I know, there is not any MUMPS Design
Kit
for Coventor at least available trhough Europractice.
Anyone knows what would I need in order to build functional MUMPS
designs with Coventor?
Is there any way to perform an automatic design rule check?
Thanks for your help

Jorge Ammrola

*********************************************************
Jorge Ammrola Sanz
Electronic Engineering Department
Semiconductor Devices Group (GDS)
UPC-Campus Nord, C5
C/Jordi Girona, 1-3
E-08034 Barcelona
SPAIN
Phone: + 34 93 401 68 76
Fax:   + 34 93 401 67 56
e-mail: amirola@eel.upc.es
*********************************************************
_______________________________________________
MEMS-talk@memsnet.org mailing list: to unsubscribe or change your list
options, visit http://mail.mems-exchange.org/mailman/listinfo/mems-talk

Hosted by the MEMS Exchange, providers of MEMS processing services.
Visit us at http://www.memsnet.org/