Dear all,

I'm searching information about the different technical possibilities to
cut holes of 200 micron diameter in Kapton film.
The profile of the material must keep a good quality.

Any input is appreciated.
Regards,
Lucia Beccai



--
----------------------------------------------
Lucia Beccai
CRIM Lab
Polo Sant'Anna Valdera
Scuola Superiore Sant'Anna
Viale Rinaldo Piaggio 34 - 56025 -Pontedera (Pisa) - Italy
phone: +39 050 883 488
fax  +39 050 883 402
http://www-crim.sssup.it/