You can use stroboscopic interferometry to measure the deformation, and then you don't have to coat your samples- If you have any questions, please give me a call. Regards- Trisha Patricia Browne Product Manager - MEMS Test & Characterization Tools Veeco Metrology 2650 E Elvira Rd Tucson, AZ 85706 P: 520-741-1044X1091 tbrowne@veeco.com -----Original Message----- From: mems-talk-bounces+tbrowne=veeco.com@memsnet.org [mailto:mems-talk-bounces+tbrowne=veeco.com@memsnet.org] On Behalf Of ramji dhakal Sent: Wednesday, October 29, 2003 1:32 PM To: General MEMS discussion Subject: [mems-talk] Sputtering/spraying for Photogrammetry Hi MEMS workers, I want to measure the deformation of some MEMS scale or a bit larger structures by Photogrammetry. I need to have a good distribution of grey areas and white areas in the images. For this, I have to spray some tiny dot particles. I need a sprayer of that capacity. Also, an appropriate spray material would be required. I tried to use some powders like Titanium oxide and some other commercially available things but they do not seem to work for that level. Could anyone suggest me a way out? Is it possible to sputter something? It should not make a continuous deposit, what I need is a contrast between the different points.. Thanks in advance for your help.. Ramji ===== Ramji Dhakal M S Mechanical Engineering, SUNY Binghamton, NY __________________________________ Do you Yahoo!? Exclusive Video Premiere - Britney Spears http://launch.yahoo.com/promos/britneyspears/ _______________________________________________ MEMS-talk@memsnet.org mailing list: to unsubscribe or change your list options, visit http://mail.mems-exchange.org/mailman/listinfo/mems-talk Hosted by the MEMS Exchange, providers of MEMS processing services. Visit us at http://www.memsnet.org/