Hello, We're interested in encapsulating some electrolyte-insulator-silicon (EIS) sensors in glass microfluidics. My question is whether anodic bonding of the pyrex will cause damage to the implant traces required in the sensor design. I suppose the temperatures are too low to cause damage, but will the large electric field or ion migration be a problem? It should be pointed out that the implants will be covered by 800 nm of nitride, so direct bonding of the pyrex will be to the nitride. But there will some windows in the nitride where the underlying silicon will be exposed to an air gap (fluidic channel ~ 3 microns) between the pyrex and the surface. Any insight or references would be greatly appreciated. Thanks ahead of time, Mike