Andrea, Either Cr or Ti should work Shay -----Original Message----- From: mems-talk-bounces+shay=mizur.com@memsnet.org [mailto:mems-talk-bounces+shay=mizur.com@memsnet.org] On Behalf Of Andrea Mazzolari Sent: Wednesday, January 05, 2011 7:39 PM To: mems-talk@memsnet.org Subject: [mems-talk] Cr/Au evaporation on diamond Hi all, i would need to evaporate 80nm of Au on a thin diamond layer. Cr is tipically used as adhesion layer while evaporating Au on Silicon. Is a Cr adhesion layer needed also to evaporate Au on diamond ? In the case Cr will not adhere on diamond, which other adhesion layer should be used ? Best regards, Andrea