Dear Rakesh we can define nanoscale features with a minimum line width of 70nm using our Raith direct write system. If you wish to send a sketch showing precise geometries and list materials specifications (substrate, adhesion, electrode material, thickness) we can give you some definitive feedback on how we can help. Cheers David Barrow ----------------------------------------------- Professor David Barrow Laboratory for Applied Microsystems & NanoFAB Cardiff School of Engineering Cardiff University Queen's Buildings 1-5 The Parade PO Box 689 Cardiff CF24 3TF Wales United Kingdom Tel +44(0)29 2087 5921 (Office) Tel +44(0)29 2087 4716 (Laboratory) Mob +44(0)77 8526 4780 E-m barrow@cf.ac.uk ----------------------------------------------- >>> dabasrk@yahoo.co.in 08/09/02 16:09 PM >>> Dear MEMS friends, I tried to find out suppliers of nanoelctrodes on web, & i also contact to some suppliers, but they can fabricate only the microelectrodes (gap between electrodes >5 micron). I want nanoelectrodes (gap between nanoelectrodes should <200 nm). We have facility for fabrication of microelectrodes. If anybody can solve my problem then contact me on address given below: Rakesh Dabas Scintist Microelectronics Instrumentation Division (MID) Central Scientific Instruments Organisation (CSIO) Sector 30-C, Chandigarh-160030 India E-Mail: dabasrk@rediffmail.com dabasrk@yahoo.co.in ________________________________________________________________________ Want to sell your car? advertise on Yahoo Autos Classifieds. It's Free!! visit http://in.autos.yahoo.com _______________________________________________ MEMS-talk@memsnet.org mailing list: to unsubscribe or change your list options, visit http://mail.mems-exchange.org/mailman/listinfo/mems-talk Hosted by the MEMS Exchange, providers of MEMS processing services. Visit us at http://www.memsnet.org/