durusmail: mems-talk: Printing of Lithography Mask designed in Autocad
Printing of Lithography Mask designed in Autocad
2012-09-11
Mohd.Yusuf
Printing of Lithography Mask designed in Autocad
Mohd.Yusuf
2012-09-11
Hi Gabriel,

Great help !  I think you have hit the right spot. Apparantly, it seems
working. Earlier, I tried changing line styles, line widths etc... but the
options you suggested remained un-noticed.

All lines were drawn as closed polygons.
I am not sure about printer resolution as i have not yet tried to
practically print it. But will give a try now.

Thanks a lot to all.

Regards,
Yusuf
PhD student.
**


On Tue, Sep 11, 2012 at 3:46 PM, Gabriel Puebla-Hellmann <
gabriepu@phys.ethz.ch> wrote:

> Hi Yusuf,
>
> There are a bunch of plotting options in autocad in the plot dialog, if you
> uncheck "Plot with plot styles" and "Plot object lineweights"  you should
> be
> fine if I remember correctly.
> Best,
>
> Gabriel
>
> **************************************************************
> Gabriel Puebla-Hellmann
> ETH Zuerich
> Laboratory for Solid State Physics
> Quantum Device Lab
> HPF D5
> Schafmattstr.  16
> 8093 Zurich
> Switzerland
>
> Tel: +41 44 633 71 24
>
> www.qudev.ethz.ch
> **************************************************************
>
>
> -----Original Message-----
> From: mems-talk-bounces+gabriepu=phys.ethz.ch@memsnet.org
> [mailto:mems-talk-bounces+gabriepu=phys.ethz.ch@memsnet.org] On Behalf Of
> Mohd.Yusuf
> Sent: Tuesday, September 11, 2012 12:19 PM
> To: General MEMS discussion
> Subject: [mems-talk] Printing of Lithography Mask designed in Autocad
>
> Hi,
>
> I have designed a lithography mask (for microfluidics and electrodes) in
> Autocad 2013 / 2002. the design is perfect as i have converted the design
> file to other formats LASI, GDS and found to be correct in dimensions. the
> dimensions are in the range of few 10s of microns to 100s of microns.
> BUT-  i want to print this mask design on paper - plastic foil using high
> resolution printers. when i try to do this - in print preview i just see
> very very thick lines of all features drawn in autocad.  i checked many
> books.. forums.. no clue yet. is there anything related to linewidth ?  how
> to change it.. ?
>
> i am new to autocad and also mask design.
>
> Help !!!
>
> Regards,
> ysm
>
>
> PhD student.
> _______________________________________________
> Hosted by the MEMS and Nanotechnology Exchange, the country's leading
> provider of MEMS and Nanotechnology design and fabrication services.
> Visit us at http://www.mems-exchange.org
>
> Want to advertise to this community?  See http://www.memsnet.org
>
> To unsubscribe:
> http://mail.mems-exchange.org/mailman/listinfo/mems-talk
>
>
> _______________________________________________
> Hosted by the MEMS and Nanotechnology Exchange, the country's leading
> provider of MEMS and Nanotechnology design and fabrication services.
> Visit us at http://www.mems-exchange.org
>
> Want to advertise to this community?  See http://www.memsnet.org
>
> To unsubscribe:
> http://mail.mems-exchange.org/mailman/listinfo/mems-talk
>
_______________________________________________
Hosted by the MEMS and Nanotechnology Exchange, the country's leading
provider of MEMS and Nanotechnology design and fabrication services.
Visit us at http://www.mems-exchange.org

Want to advertise to this community?  See http://www.memsnet.org

To unsubscribe:
http://mail.mems-exchange.org/mailman/listinfo/mems-talk
reply