Joycelyn, Missed your email. Get in contact with me and I will send you details of sub-micron metal pillars, 10 micron metal pillars and up to 30 micron metal pillars using either standard positive resist or photosensitive polyimide. Bill Moffat -----Original Message----- From: mems-talk-bounces+bmoffat=yieldengineering.com@memsnet.org [mailto:mems- talk-bounces+bmoffat=yieldengineering.com@memsnet.org] On Behalf Of André Bödecker Sent: Wednesday, April 03, 2013 1:52 AM To: mems-talk@memsnet.org Subject: [mems-talk] SU8 for Au Plating Dear Jocelyn, what is the reason for you to use SU-8? This resist is designated as a permanent resist so it is quite unsuitable for plating processes in the case you want to remove it afterwards. For such applications I would recommend a normal positive resist. Best regards, André Bödecker _______________________________________________ Hosted by the MEMS and Nanotechnology Exchange, the country's leading provider of MEMS and Nanotechnology design and fabrication services. Visit us at http://www.mems-exchange.org Want to advertise to this community? See http://www.memsnet.org To unsubscribe: http://mail.mems-exchange.org/mailman/listinfo/mems-talk _______________________________________________ Hosted by the MEMS and Nanotechnology Exchange, the country's leading provider of MEMS and Nanotechnology design and fabrication services. Visit us at http://www.mems-exchange.org Want to advertise to this community? See http://www.memsnet.org To unsubscribe: http://mail.mems-exchange.org/mailman/listinfo/mems-talk