You can use some UV curing epoxy to fix the chip to the fiber once you have
contacted the two with the xyz translation stage.

-----Original Message-----
From: mems-talk-bounces+tans=fotonik.dtu.dk@memsnet.org [mailto:mems-talk-
bounces+tans=fotonik.dtu.dk@memsnet.org] On Behalf Of Andrew Sarangan
Sent: 27. oktober 2014 16:17
To: General MEMS discussion
Subject: Re: [mems-talk] Adhesive for Optics Fiber and Silicon chip

Instead of bringing the chip to the fiber, fix the fiber in a standard fiber
mount and move with a xyz translation stage to contact the chip, just like you
would for optical coupling.
On Oct 27, 2014 10:49 AM, "DEEPAN KISHORE KUMAR" 
wrote:

> Hi All,
>
> We are trying to bond a small silicon chip at the edge of the 150
> micron optical fiber, we are trying to bring the chip in contact with
> the fiber, but the micro-manipulator is not sufficient as we tend to
> break the fiber very easily.  Any ideas about what adhesive and what
> technique can be used for bonding a chip on the tip of a fiber ?
>
> Thanks,
> Deepan
>
>
>
>
> --
> Sent from iPhone, please excuse brevity.
> _______________________________________________
> Hosted by the MEMS and Nanotechnology Exchange, the country's leading
> provider of MEMS and Nanotechnology design and fabrication services.
> Visit us at http://www.mems-exchange.org
>
> Want to advertise to this community?  See http://www.memsnet.org
>
> To unsubscribe:
> http://mail.mems-exchange.org/mailman/listinfo/mems-talk
>
_______________________________________________
Hosted by the MEMS and Nanotechnology Exchange, the country's leading provider
of MEMS and Nanotechnology design and fabrication services.
Visit us at http://www.mems-exchange.org

Want to advertise to this community?  See http://www.memsnet.org

To unsubscribe:
http://mail.mems-exchange.org/mailman/listinfo/mems-talk
_______________________________________________
Hosted by the MEMS and Nanotechnology Exchange, the country's leading
provider of MEMS and Nanotechnology design and fabrication services.
Visit us at http://www.mems-exchange.org

Want to advertise to this community?  See http://www.memsnet.org

To unsubscribe:
http://mail.mems-exchange.org/mailman/listinfo/mems-talk