durusmail: mems-talk: Thin film deposition at room temperature
Thin film deposition at room temperature
2012-08-23
Yingtao Tian
2012-08-23
Alex Mellnik
2012-08-23
Yingtao Tian
2012-08-23
Ruiz, Marcos Daniel (SGNCOE)
2012-08-23
Nabhiraj Yalagoud
2012-08-23
Yingtao Tian
2012-08-23
G. Puebla-Hellmann
2012-08-23
Nabhiraj Yalagoud
2012-08-23
Jesse D Fowler
2012-08-24
Piyush Shah
2012-08-24
Sudhin Thampi
2012-08-24
Rajul Patkar
Thin film deposition at room temperature
Yingtao Tian
2012-08-23
Hi Alex,

Sorry forgot to say, the substrate is photoresist. So, I cannot use any plasma
or heat evaporation.

Thanks,
Yingtao

-----Original Message-----
From: mems-talk-bounces+y.tian=bham.ac.uk@memsnet.org [mailto:mems-talk-
bounces+y.tian=bham.ac.uk@memsnet.org] On Behalf Of Alex Mellnik
Sent: 23 August 2012 18:23
To: General MEMS discussion
Subject: Re: [mems-talk] Thin film deposition at room temperature

What's under the film?  If it's not sensitive to oxygen plasmas you can
evaporate carbon and then ash it off.

-Alex

On Thu, Aug 23, 2012 at 11:11 AM, Yingtao Tian  wrote:
> Hi All,
>
> I am trying to get round of how to put a thin film down at room temperature. I
need a localised thin film with following properties:
>
> 1. non-transparent
> 2. as thin as possible - say in the order of few microns 3. easy to
> remove 4. can be applied at around room temperature
>
> I am thinking of some possible spray, but have not got any clue. I would
appreciate if you have some  interesting idea about it.
>
>
> Thanks a lot.
>
> Regards,
> Yingtao
> _______________________________________________
> Hosted by the MEMS and Nanotechnology Exchange, the country's leading
> provider of MEMS and Nanotechnology design and fabrication services.
> Visit us at http://www.mems-exchange.org
>
> Want to advertise to this community?  See http://www.memsnet.org
>
> To unsubscribe:
> http://mail.mems-exchange.org/mailman/listinfo/mems-talk
_______________________________________________
Hosted by the MEMS and Nanotechnology Exchange, the country's leading provider
of MEMS and Nanotechnology design and fabrication services.
Visit us at http://www.mems-exchange.org

Want to advertise to this community?  See http://www.memsnet.org

To unsubscribe:
http://mail.mems-exchange.org/mailman/listinfo/mems-talk
_______________________________________________
Hosted by the MEMS and Nanotechnology Exchange, the country's leading
provider of MEMS and Nanotechnology design and fabrication services.
Visit us at http://www.mems-exchange.org

Want to advertise to this community?  See http://www.memsnet.org

To unsubscribe:
http://mail.mems-exchange.org/mailman/listinfo/mems-talk
reply